Template:FM errata

Revision as of 09:33, 27 October 2021 by Mantas.Kraujelis (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

Introduction

We are always improving our devices performance, stability and reliability. That’s why Teltonika is one of the leading GNSS trackers manufacturers in the world.
This document describes FMB140 platform device's firmware improvements, changes, new features implementations as well as current firmware release version.


FIRMWARE VERSION SUPPORTED HARDWARE
03.25.XX FMB140
03.27.XX FMB140

Firmware versioning

  • Structure
FMB(T).VER.[XX].[YY].[ZZ].Rev.[##] _[ID###]
  • Syntax description
    • XX – major FW version.
    • YY – branch number, shows major changes in firmware, i.e. new module support added or new major feature added.
    • ZZ – major changes like bigger fixes, improvements and new features addition.
    • ## – minor changes like small fixes and improvements.
    • ID[###] – Spec ID KEY – Specific clients FW changes.

Firmware versions

FIRMWARE VERSION RELEASE DATE CHANGES
03.27.07.Rev.00
(recommended for FMB140)
2021.08.02
  • New Flash memory component support added
  • Inverted DOUT functionality added
  • Universal beacons functionality added
  • Added Beacon On Change functionality
  • Beacons list expanded to support 50 beacon ID's
  • BLE AES128 encryption added
  • Added Ignition On Counter functionality
  • Added BLE Efento sensor support
  • Added encrypted record support (TLS)
  • Added Ban list control functionality
  • EGTS protocol support added
  • Added configurable ACK type (TCP/AVL) source feature
  • Advanced eco driving for all hardware
  • Matrix3 RFID support added
  • iButton list extended to 4000 iButtons
  • Device records saving/sending improvements
  • Towing scenario improvements
  • SMS Data Sending improvements on events generation
  • SMS commands setdigout and readio sending improvements
  • Time synch from NTP/NITZ improvements
  • Device wake up from sleep modes improvements
  • HW with eSIM feature general working improvements
  • Can adapters data reading on ignition off/on improvements
  • Can adapters settings over SMS commands improved
  • General device debug logs capture improvements
  • BLE whitelist (scan stability improvements)
  • Battery protection improvements
  • Improved system stability and fixed general bugs
03.25.16.Rev.410
2020.12.11
  • Odometer calculation from CAN data improvements

Newest production base firmware version for FMB140 devices in factory is 03.25.16.Rev.410.

The update was made to improve odometer calculations when LVCAN is set as odometer source.

We highly recommend to update firmware to make sure that the received odometer data is as accurate as possible. New orders of FMB140 are manufactured with the latest firmware.

03.25.16.Rev.281 2020.09.16
03.25.16.Rev.102
2020.07.22
  • lvcansetting SMS command can be set only in DEC format
  • CAN module sleep algorithm improvement
03.25.15.Rev.145
2020.04.06
  • Improved RPM ignition detection
  • Improved CAN IO priorities
  • Added lvcansetting SMS command (HEX)
03.25.15.Rev.143
2020.02.20
03.25.11.Rev.144
2019.11.22
  • Stability improvements
  • General Fixes
  • Added FMB140 support
  • Added FOTA WEB/Status transfer for FMB140 CAN chip firmware download.
  • Initial release