Template:MTB100 First start card

From Wiki Knowledge Base | Teltonika GPS
Qsg rut950 teltonika.PNG

Small and smart tracker with Blue-tooth

MTB100.png




How to insert Micro-SIM card and connect internal back-up battery

  1. Gently remove MTB100 cover using plastic pry tool from both sides.
  2. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
  3. Connect internal back-up battery.
  4. Attach device cover back.

MTB100 cover 1.pngMTB100 cover 2.pngMTB100 cover 3.pngMTB100 cover 4.png


Alert.png
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.