Changes

{{{mounting_recommendations|=='''Mounting recommendations'''==

{{{mounting_recommendations|=='''Mounting recommendations'''==

{{{connecting_wires|* Connecting wires

{{{connecting_wires|* <big>Connecting wires</big>

{{{plugged_in|** a}}}

{{{plugged_in|** Wires should be connected while the module is not plugged in.}}}

** Wires should be fastened to stable wires or other non-moving parts. Any heat emitting and/or moving objects should be kept away from the wires.

:* Wires should be fastened to stable wires or other non-moving parts. Any heat emitting and/or moving objects should be kept away from the wires.

** There should be no exposed wires. If factory isolation was removed while connecting wires, the isolation material should be applied.

:* There should be no exposed wires. If factory isolation was removed while connecting wires, the isolation material should be applied.

** If the wires are placed in the exterior or in places where they can be damaged or exposed to heat, humidity, dirt, etc., additional isolation should be applied and the wires should not be loose.

:* If the wires are placed in the exterior or in places where they can be damaged or exposed to heat, humidity, dirt, etc., additional isolation should be applied and the wires should not be loose.

** Wires cannot be connected to the board computers or control units.

:* Wires cannot be connected to the board computers or control units.

}}}

}}}

**For better contact scrub paint from the spot where loop is going to be connected.

**For better contact scrub paint from the spot where loop is going to be connected.

}}}

}}}

{{{pay_attention|{{Template:Pay_attention|model={{{model|FMB2YX}}}}}}}}

 

{{Template:Pay_attention|model={{{model|FMB2YX}}}}}

 

}}}

}}}

*To avoid mechanical damage, it is advised to transport the device in an impact-proof package. {{{LED_indicators|Before usage, the device should be placed so that its LED indicators are visible. They show the status of device operation.}}}

*To avoid mechanical damage, it is advised to transport the device in an impact-proof package. {{{LED_indicators|Before usage, the device should be placed so that its LED indicators are visible. They show the status of device operation.}}}

{{{FMB0_3_ignition|*Before unmounting the device from the vehicle, ignition '''MUST be OFF'''.}}}

{{{FMB0_3_ignition|*Before unmounting the device from the vehicle, ignition '''MUST be OFF'''.}}}

{{{connecting|* When connecting the {{{2x6_wires|2x6 connector wires to the vehicle}}} {{{1x5_wires|connection (1x5) cables to the vehicle}}}, the appropriate jumpers of the vehicle power supply should be disconnected.}}}

{{{connecting|* When connecting the {{{wires|wires}}}{{{2x6_wires|2x6 connector wires to the vehicle}}}{{{1x5_wires|connection (1x5) cables to the vehicle}}}, the appropriate jumpers of the vehicle power supply should be disconnected.}}}

{{{FMB2_connecting_cables|* When installing the connection cables to the vehicle, the appropriate jumpers of the power supply of the vehicle should be disconnected.}}}

{{{FMB2_connecting_cables|* When installing the connection cables to the vehicle, the appropriate jumpers of the power supply of the vehicle should be disconnected.}}}

{{{unmounting|* Before unmounting the device from the vehicle, the {{{2x6_connector|2x6 connector}}} {{{1x5_connection|1x5 connection}}} must be disconnected.}}}

{{{unmounting|* Before unmounting the device from the vehicle, the {{{2x6_connector|2x6 connector}}} {{{1x5_connection|1x5 connection}}} must be disconnected.}}}

{{{zone_of_limited|* The device is designed to be mounted in a zone of limited access, which is inaccessible to the operator. All related devices must meet the requirements of EN 60950-1 standard.}}}

{{{zone_of_limited|* The device is designed to be mounted in a zone of limited access, which is inaccessible to the operator. All related devices must meet the requirements of EN 60950-1 standard.}}}<br>

{{{boats|* The device {{{model|FMB1YX}}} is not designed as a navigational device for boats.}}}

{{{boats|* The device {{{model|FMB1YX}}} is not designed as a navigational device for boats.}}}