1,600
edits
Changes
Template:Mounting recommendations (view source)
Revision as of 12:04, 29 April 2021
, 12:04, 29 April 2021Reverted edits by Edga.D (talk) to last revision by Kriauciunas.to
**For better contact scrub paint from the spot where loop is going to be connected.
**For better contact scrub paint from the spot where loop is going to be connected.
}}}
}}}
{{{pay_attention|{{Template:Pay_attention|model={{{model|FMB2YX}}}}}}}}
{{Template:Pay_attention|model={{{model|FMB2YX}}}}}
}}}
}}}
*To avoid mechanical damage, it is advised to transport the device in an impact-proof package. {{{LED_indicators|Before usage, the device should be placed so that its LED indicators are visible. They show the status of device operation.}}}
*To avoid mechanical damage, it is advised to transport the device in an impact-proof package. {{{LED_indicators|Before usage, the device should be placed so that its LED indicators are visible. They show the status of device operation.}}}
{{{FMB0_3_ignition|*Before unmounting the device from the vehicle, ignition '''MUST be OFF'''.}}}
{{{FMB0_3_ignition|*Before unmounting the device from the vehicle, ignition '''MUST be OFF'''.}}}
{{{connecting|* When connecting the {{{wires|wires}}} {{{2x6_wires|2x6 connector wires to the vehicle}}} {{{1x5_wires|connection (1x5) cables to the vehicle}}}, the appropriate jumpers of the vehicle power supply should be disconnected.}}}
{{{connecting|* When connecting the {{{wires|wires}}}{{{2x6_wires|2x6 connector wires to the vehicle}}}{{{1x5_wires|connection (1x5) cables to the vehicle}}}, the appropriate jumpers of the vehicle power supply should be disconnected.}}}
{{{FMB2_connecting_cables|* When installing the connection cables to the vehicle, the appropriate jumpers of the power supply of the vehicle should be disconnected.}}}
{{{FMB2_connecting_cables|* When installing the connection cables to the vehicle, the appropriate jumpers of the power supply of the vehicle should be disconnected.}}}
{{{unmounting|* Before unmounting the device from the vehicle, the {{{2x6_connector|2x6 connector}}} {{{1x5_connection|1x5 connection}}} must be disconnected.}}}
{{{unmounting|* Before unmounting the device from the vehicle, the {{{2x6_connector|2x6 connector}}} {{{1x5_connection|1x5 connection}}} must be disconnected.}}}
{{{zone_of_limited|* The device is designed to be mounted in a zone of limited access, which is inaccessible to the operator. All related devices must meet the requirements of EN 60950-1 standard.}}}
{{{zone_of_limited|* The device is designed to be mounted in a zone of limited access, which is inaccessible to the operator. All related devices must meet the requirements of EN 60950-1 standard.}}}<br>
{{{boats|* The device {{{model|FMB1YX}}} is not designed as a navigational device for boats.}}}
{{{boats|* The device {{{model|FMB1YX}}} is not designed as a navigational device for boats.}}}
