0
edits
Changes
Template:Networking rut2xx upnp (view source)
Revision as of 11:42, 10 February 2020
, 11:42, 10 February 2020no edit summary
| fw_version = {{{fw_version}}}
| fw_version = {{{fw_version}}}
}}
}}
==Active UPnP Redirects==
In this table you can see all currently active UPnP redirects.
[[File:{{{file_redirects}}}|border|class=tlt-border]]
==General Settings==
==General Settings==
[[File:{{{file_redirects}}}|border|class=tlt-border]]
[[File:{{{file_settings1}}}|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
</tr>
</tr>
<tr>
<tr>
<td>Enable</td>
<td>Enabled</td>
<td>yes {{!}} no; Default: '''no'''</td>
<td>no | yes; Default: '''no'''</td>
<td>Toggles UPnP ON or OFF</td>
<td>Toggles UPnP ON or OFF</td>
</tr>
</tr>
<tr>
<tr>
<td>Use secure mode</td>
<td>Enable secure mode</td>
<td>yes {{!}} no; Default: '''yes'''</td>
<td>no | yes; Default: '''yes'''</td>
<td>Toggles Secure mode ON or OFF</td>
<td>Toggles secure mode ON or OFF</td>
</tr>
<tr>
<td>Enable additional logging</td>
<td>no | yes; Default: '''no'''</td>
<td>Puts extra debugging information into the system log</td>
</tr>
<tr>
<td>Downlink</td>
<td>integer; Default: '''1024'''</td>
<td>Bandwidth available for traffic coming in from the external interface in kilobytes per second. Note that this only information given to clients, it doesn't control the speed. In order to control the speed, you can try configuring [[{{{name}}}_QoS#QoS|QoS]].</td>
</tr>
<tr>
<td>Uplink</td>
<td>integer; Default: '''512'''</td>
<td>Bandwidth available for traffic out the external interface in kilobytes per second. Note that this only information given to clients, it doesn't control the speed. In order to control the speed, you can try configuring [[{{{name}}}_QoS#QoS|QoS]].</td>
</tr>
<tr>
<td>Port</td>
<td>integer [1..65535]; Default: '''5000'''</td>
<td>Port to listen for requests</td>
</tr>
</tr>
</table>
</table>
==Advanced Settings==
==Advanced Settings==
[[File:{{{file_settings1}}}|border|class=tlt-border]]
[[File:{{{file_settings2}}}|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
</tr>
</tr>
<tr>
<tr>
<td>Use UPnP port mapping</td>
<td>Report system instead of daemon uptime</td>
<td>yes {{!}} no; Default: '''yes'''</td>
<td>>no | yes; Default: '''yes'''</td>
<td>Toggles UPnP port napping ON or OFF</td>
<td>Use system uptime as UPnP uptime</td>
</tr>
</tr>
<tr>
<tr>
<td>Use NAT-PMP port mapping</td>
<td>Device UUID</td>
<td>yes {{!}} no; Default: '''yes'''</td>
<td>string; Default: '''unique'''</td>
<td>Toggles NAT-PMP port mapping ON or OFF</td>
<td>The Device UUID attribute specifies and uniquely identifies a device that supports Universal Plug and Play (UPnP)</td>
</tr>
</tr>
<tr>
<tr>
<td>Device UUID</td>
<td>Announced serial number</td>
<td>yes {{!}} no; Default: '''yes'''</td>
<td>string; Default: " "</td>
<td>Specify Universal unique ID of the device</td>
<td>Specifies serial number for XML Root Desc.</td>
</tr>
<tr>
<td>Announced model number</td>
<td>string; Default: " "</td>
<td>Specifies model number for XML Root Desc.</td>
</tr>
<tr>
<td>Notify interval</td>
<td>integer; Default: " "</td>
<td>Interval in which UPnP capable devices send a message to announce their services</td>
</tr>
</tr>
<tr>
<tr>
<td>Clean ruler threshold</td>
<td>integer; Default: " "</td>
<td>Minimum number of redirections before clearing rules table of old (active) redirections</td>
</tr>
</tr>
<tr>
<tr>
<td>Clean ruler interval</td>
<td>integer; Default: " "</td>
<td>Number of seconds before cleaning redirections</td>
</tr>
</tr>
<tr>
<tr>
<td>Presentation URL</td>
<td>string; Default: " "</td>
<td>Presentation url used for the Root Desc.</td>
</tr>
</tr>
<tr>
<tr>
<td>Device UUID</td>
<td>UPnP lease file</td>
<td>yes {{!}} no; Default: '''yes'''</td>
<td>string; Default: '''/var/upnp.leases'''</td>
<td>Specify Universal unique ID of the device</td>
<td>Stores active UPnP redirects in a lease file (specified), like DHCP leases</td>
</tr>
</tr>
</table>
</table>
==UPnP ACLs==
==UPnP ACLs==
ACLs specify which external ports may be redirected to which internal addresses and ports
ACLs specify which external ports may be redirected to which internal addresses and ports. There are two preconfigured rules, one to allow high ports, and another to deny the rest. Highest priority is at the top of a list and goes down. To add another specific rule press add button
[[File:{{{file_ACLs}}}|border|class=tlt-border]]
[[File:{{{file_ACLs}}}|border|class=tlt-border]]
<tr>
<tr>
<td>Comment</td>
<td>Comment</td>
<td>string; Default: '''Allow high ports'''</td>
<td>string; Default: " "</td>
<td>Adds a comment to this rule</td>
<td>Adds a comment to this rule</td>
</tr>
</tr>
<tr>
<tr>
<td>External ports</td>
<td>External ports</td>
<td>integer [0..65535]] {{!}} range of integers [0-65535]; Default: '''1024-65535'''</td>
<td>integer [0..65535]] | range of integers [0-65535]; Default: " "</td>
<td>External port(s) which may be redirected. May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers</td>
<td>External port(s) which may be redirected. May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers</td>
</tr>
</tr>
<tr>
<tr>
<td>Internal Addresses</td>
<td>Internal Addresses</td>
<td>ip/integer [0..32]; Default: '''0.0.0.0/0'''</td>
<td>ip/integer [0..32]; Default: " "</td>
<td>Internal address to be redirect to</td>
<td>Internal address to be redirect to</td>
</tr>
</tr>
<tr>
<tr>
<td>Internal ports</td>
<td>Internal ports</td>
<td>integer [0..65535]] {{!}} range of integers [0-655355]; Default: '''1024-65535'''</td>
<td>integer [0..65535]] | range of integers [0-655355]; Default: " "</td>
<td>Internal port(s) to be redirect to May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers</td>
<td>Internal port(s) to be redirect to May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers</td>
</tr>
</tr>
<tr>
<tr>
<td>Action</td>
<td>Action</td>
<td>allow {{!}} deny; Default: '''allow'''</td>
<td>allow | deny; Default: '''allow'''</td>
<td>Allows or forbids the UPnP service to open the specified port</td>
<td>Allows or forbids the UPnP service to open the specified port</td>
</tr>
</tr>
</table>
</table>
[[Category:{{{name}}} WebUI]]