Template:Networking rut2xx upnp
From Wiki Knowledge Base | Teltonika GPS
Summary
UPnP allows clients in the local network to automatically configure the router. This chapter is a summary of the UPnP function in RUT routers
Template:Networking rutxxx manual fw disclosure
Active UPnP Redirects
[[File:{{{file_redirects}}}|border|class=tlt-border]]
123
General Settings
[[File:{{{file_settings1}}}|border|class=tlt-border]]
| field name | value | description |
|---|---|---|
| Enabled | ||
| Enable secure mode | ||
| Enable additional logging | ||
| Downlink | ||
| Uplink | ||
| Port |
Advanced Settings
[[File:{{{file_settings2}}}|border|class=tlt-border]]
| field name | value | description |
|---|---|---|
| Report system instead of daemon uptime | ||
| Device UUID | ||
| Announced serial number | ||
| Announced model number | ||
| Notify interval | ||
| Clean rules threshold | ||
| Clean rules interval | ||
| Presentation URL | ||
| UPnP lease file |
UPnP ACLs
ACLs specify which external ports may be redirected to which internal addresses and ports
[[File:{{{file_ACLs}}}|border|class=tlt-border]]
| field name | value | description |
|---|---|---|
| Comment | string; Default: Allow high ports | Adds a comment to this rule |
| External ports | integer [0..65535]] | range of integers [0-65535]; Default: 1024-65535 | External port(s) which may be redirected. May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers |
| Internal Addresses | ip/integer [0..32]; Default: 0.0.0.0/0 | Internal address to be redirect to |
| Internal ports | integer [0..65535]] | range of integers [0-655355]; Default: 1024-65535 | Internal port(s) to be redirect to May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers |
| Action | allow | deny; Default: allow | Allows or forbids the UPnP service to open the specified port |
