Changes

* Always: charger is always enabled, except if the battery is fully charged or 10-minute timeout has not passed since the device was turned on for faster FIX receiving.

* Always: charger is always enabled, except if the battery is fully charged or 10-minute timeout has not passed since the device was turned on for faster FIX receiving.

[[Image:Screenshot 2024-03-01 at 14-11-41 5.2. System - Mobility documentation.png]]

[[Image:Screenshot 2024-03-01 at 14-11-41 5.2. System - Mobility documentation.png]]

}}

}}

Lowest voltage to enabled DIN for 150V range - 9V

Lowest voltage to enabled DIN for 150V range - 9V

}}

}}

|}

|}

{|

{|

{{#if:{{{DOUT Overcurrent protection|}}}

{{#if:{{{TFT_DOUT_Overcurrent_protection|}}}

===DOUT Overcurrent protection===

|===DOUT Overcurrent protection===

DOUTs have overcurrent protection that triggers after the current exceeds 300 mA. This protection works by generating pulses on the hardware. When the firmware detects at least 20 impulses on a DOUT it turns off that DOUT for 5 minutes. During this time all scenarios that try to turn this DOUT on will fail.

DOUTs have overcurrent protection that triggers after the current exceeds 300 mA. This protection works by generating pulses on the hardware. When the firmware detects at least 20 impulses on a DOUT it turns off that DOUT for 5 minutes. During this time all scenarios that try to turn this DOUT on will fail.

}}

}}

|}

|}

{|

{|

{{#if:{{{Data_protocol|}}}

{{#if:{{{Data_protocol|}}}

[[File:Time sync chart.png|thumb]]

[[File:Time sync chart.png|thumb]]

|}

|}

}}

}}

|}

|}

=== Mounting Guidelines ===

 

|=== Mounting Guidelines ===

The device should be mounted according to the picture below. Logo/Antenna must be facing up.

The device should be mounted according to the picture below. Logo/Antenna must be facing up.

[[File:Screenshot 2024-03-04 at 09-01-13 tft100-mounting-guidelines.jpg (JPEG Image 900 × 600 pixels).png|thumb]]

[[File:Screenshot 2024-03-04 at 09-01-13 tft100-mounting-guidelines.jpg (JPEG Image 900 × 600 pixels).png|thumb]]

<br>

<br>

<br>

<br>

===Accelerometer delay===

 

|===Accelerometer delay===

Configurable movement start/stop delay settings.

Configurable movement start/stop delay settings.

[[Image:Screenshot 2024-03-01 at 14-40-45 5.2. System - Mobility documentation.png|thumb]]

[[Image:Screenshot 2024-03-01 at 14-40-45 5.2. System - Mobility documentation.png|thumb]]

For example, if the Movement Start Delay is set to 1s and Movement Stop Delay to 60s, the movement will be detected after 1s of moving and defined as stopped after 60s when device stopped moving.

For example, if the Movement Start Delay is set to 1s and Movement Stop Delay to 60s, the movement will be detected after 1s of moving and defined as stopped after 60s when device stopped moving.

{|

{|