505
edits
Changes
Universal Device Test Guide (view source)
Revision as of 12:58, 23 March 2021
, 12:58, 23 March 2021no edit summary
[[Image:Qsg_rut950_teltonika.PNG|centre]]
<b>{{{description|Small and smart tracker with Bluetooth}}}</b>
{{{pic|[[Image:Fmb920 main.png|400px|right]]}}}
<br>
{| class="wikitable"
__TOC__
=='''How to insert Micro-SIM card'''==
{{{without_battery|
# Gently remove {{{model|FMB9YX}}} '''cover''' using '''plastic pry tool''' from both sides.
# Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[{{{model|FMB9YX}}} Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot.
# Attach device '''cover''' back.
# Device is ready to be connected.}}}
{{{with_battery|
# Gently remove {{{model|FMB9YX}}} '''cover''' using '''plastic pry tool''' from both sides.
# Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[{{{model|FMB9YX}}} Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot.
# Connect the battery as shown on device. Position the battery in place where it does not obstruct other components.
# Attach device '''cover''' back. Device is ready to be connected.}}}
{{{SIM1|[[Image:FMB9_sim_ir_battery_insert-1.png|260px]]}}}
{{{SIM2|[[Image:FMB9_sim_ir_battery_insert-2.png|260px]]}}}
{{{SIM3|[[Image:FMB9_sim_ir_battery_insert-3.png|260px]]}}}
{{{SIM4|[[Image:FMB9_sim_ir_battery_insert-4.png|260px]]}}}
{|
|-
| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b>
|}
{{{PCConnection|
===PC Connection (Windows)===
{{{fmb_powerup|# Power-up {{{model|FMB1YX}}} with '''DC voltage {{{dc_voltage|(10 – 30 V)}}}''' power supply using '''{{{power_cable|supplied power cable}}}'''. LED’s should start blinking, see “'''{{{led_status_link|LED behaviour description}}}'''”.}}}
# Connect device to computer using '''{{{usb_cable|Micro-USB}}} cable''' or '''Bluetooth''' connection:
#* Using '''{{{usb_cable|Micro-USB}}} cable'''
#** You will need to install USB drivers, see "[[#How to install USB drivers (Windows)|'''How to install USB drivers (Windows)''']]"
#* Using '''Bluetooth'''
#** {{{model|FMB1YX}}} Bluetooth is enabled by default. Turn on '''Bluetooth''' on your PC, then select '''Add Bluetooth or other device > Bluetooth'''. Choose your device named – “'''{{{model|FMB1YX}}}_last_7_imei_digits'''”, without '''LE''' in the end. Enter default password '''5555''', press '''Connect''' and then select '''Done'''.
# You are now ready to use the device on your computer.
}}}
===How to install USB drivers (Windows)===
# Please download COM port drivers from Teltonika '''[https://teltonika-gps.com/downloads/en/fmb120/TeltonikaCOMDriver.zip here]'''.
# Extract and run '''TeltonikaCOMDriver.exe'''.
# Click '''Next''' in driver installation window.
# In the following window click '''Install''' button.
# Setup will continue installing the driver and eventually the confirmation window will appear. Click '''Finish''' to complete the setup.
===Configuration (Windows)===
At first {{{model|FMB1YX}}} device will have default factory settings set. These settings should be changed according to the user's needs.<br/>
Main configuration can be performed via '''[[Teltonika Configurator]]''' software. Get the latest {{{model|FMB1YX}}} '''Configurator''' version from '''[[{{{SAS_Configurator_Versions|Teltonika Configurator versions}}}|here]]'''. Configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed.
{| class="wikitable" style="width:50%;"
|+
|+
! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| PIN NUMBER
! colspan="4" style="width:50%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| MS .NET requirements
|-
|-
! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| Operating system
! style="width:25%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| MS .NET Framework version
! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| Version
! style="width:5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| Link
|-
|-
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <ul style="list-style: none; margin: 0px;">
<li>Windows Vista</li>
<li>Windows 7</li>
<li>Windows 8.1</li>
<li>Windows 10</li>
</ul>
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | MS .NET Framework 4.6.2
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 32 and 64 bit
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | [https://www.microsoft.com/en-us/download/confirmation.aspx?id=53344 www.microsoft.com]
|}
|}
{{Template:FMB First start config|model=FMB920|config_link=[[FMB920 Configuration|here]]|cfg_connect=Configurator_connect-FMB920.jpg|dc_voltage=6-30 V|led_status_link=[[FMB920 LED status]]|power_cable=power cable|family=FMB9}}
Downloaded '''Configurator''' will be in compressed archive. Extract it and launch '''Configurator.exe'''. After launch software language can be changed by clicking [[File:Language_icon.png|25px|link=]] in the right bottom corner:
[[File:FMB_Configurator_language.jpg|400px]]
Configuration process begins by pressing on connected device:
[[File:{{{cfg_connect|Configurator_connect-FMB130.jpg}}}|400px]]
After connection to Configurator '''Status window''' will be displayed:
[[Image:{{{model|FMB120}}} Beacon-info-{{{family|FMB1}}} series.png|1000px|none]]
Various '''[[{{{model|FMB1YX}}}_Status_info|Status window]]''' tabs display information about '''[[{{{model|FMB1YX}}}_Status_info#GNSS_Info|GNSS]], [[{{{model|FMB1YX}}}_Status_info#GSM_Info|GSM]], [[{{{model|FMB1YX}}}_Status_info#I.2FO_Info|I/O]], [[{{{model|FMB1YX}}}_Status_info#Maintenance|Maintenance]]''' and etc. {{{model|FMB1YX}}} has one user editable profile, which can be loaded and saved to the device. After any modification of configuration the changes need to be saved to device using '''Save to device''' button. Main buttons offer following functionality:<br/>
# [[File:Load_from_device.png|25px|link=]] '''Load from device''' – loads configuration from device.
# [[File:Save_to_device.png|25px|link=]] '''Save to device''' – saves configuration to device.
# [[File:Load_from_file.png|25px|link=]] '''Load from file''' – loads configuration from file.
# [[File:Save_to_file.png|25px|link=]] '''Save to file''' – saves configuration to file.
# {{{Firmware_button| [[File:Firmware_update.png|25px|link=]] '''Update firmware''' – updates firmware on device.}}}
# [[File:Read_records.png|25px|link=]] '''Read records''' – read records from device.
# [[File:Reboot_device.png|25px|link=]] '''Reboot device''' – restarts device.
# [[File:Reset_configuration.png|25px|link=]] '''Reset configuration''' – sets device configuration to default.
Most important configurator section is GPRS – where all your server and '''[[{{{model|FMB1YX}}}_GPRS_settings|GPRS settings]]''' can be configured and '''[[{{{model|FMB1YX}}}_Data_acquisition_settings|Data Acquisition]]''' – where data acquiring parameters can be configured.
More details about {{{model|FMB1YX}}} configuration using Configurator can be found '''{{{config_link|in the manual}}}'''.
===Quick SMS configuration===
Default configuration has optimal parameters present to ensure best performance of track quality and data usage.<br/>
Quickly set up your device by sending this SMS command to it:
" setparam <span style="background-color:#91b9d4;">2001</span>:APN;<span style="background-color:#91d4b9;">2002</span>:APN_username;<span style="background-color:#b991d4;">2003</span>:APN_password;<span style="background-color:#b9d491;">2004</span>:Domain;<span style="background-color:#d491b9;">2005</span>:Port;<span style="background-color:#d4b991;">2006</span>:0"
<div style="column-count:2;-moz-column-count:2;-webkit-column-count:2">
GPRS settings:
* <span style="background-color:#91b9d4;">2001</span> – APN
* <span style="background-color:#91d4b9;">2002</span> – APN username (if there are no APN username, empty field should be left)
* <span style="background-color:#b991d4;">2003</span> – APN password (if there are no APN password, empty field should be left)
Server settings:
* <span style="background-color:#b9d491;">2004</span> – Domain
* <span style="background-color:#d491b9;">2005</span> – Port
* <span style="background-color:#d4b991;">2006</span> – Data sending protocol (0 – TCP, 1 – UDP)
</div>
'''Note''': Before SMS text, two space symbols should be inserted.<br/><br/>
[[File:IOS sms cfg.png|235px|right]]
{{{quick_sms_tmt|<table style="width:70%">
<tr>
<td colspan="4">'''Default configuration settings'''</td>
</tr>
<tr>
<td colspan="4">Movement and ignition detection:</td>
</tr>
<tr>
<td>[[File:Accelerometer.png|65px]]</td>
<td>Vehicle movement will be detected by accelerometer</td>
<td>[[File:Ignition detection-2-2.png|65px]]</td>
<td>Ignition will be detected by vehicle power voltage between 13,2 – 30 V</td>
</tr>
<tr>
<td colspan="4">Device makes a record '''On Moving''' if one of these events happen:</td>
</tr>
<tr>
<td>[[File:300s_icon_2.png|65px]]</td>
<td>300 seconds passes</td>
<td>[[File:Angle_10_2.png|65px]]</td>
<td>Vehicle turns 10° degrees</td>
</tr>
<tr>
<td>[[File:Min_distance.png|65px]]</td>
<td>Vehicle drives 100 meters</td>
<td>[[File:Speed_delta.png|65px]]</td>
<td>Speed difference between last coordinate and current position is greater than 10 km/h</td>
</tr>
<tr>
<td colspan="4">Device makes a record '''On Stop''' if:</td>
</tr>
<tr>
<td>[[File:1h_icon.png|65px]]</td>
<td>1 hour passes while vehicle is stationary and ignition is off</td>
</tr>
<tr>
<td colspan="4">Records sending to server:</td>
</tr>
<tr>
<td>[[File:120_s.png|65px]]</td>
<td>If device has made a record it is sent to the server every 120 seconds</td>
</tr>
</table>}}}
<br/>
<p>After successful SMS configuration, {{{model|FMB1YX}}} device will '''synchronize time''' and '''update records''' to '''configured server'''. Time intervals and default I/O elements can be changed by using [[Teltonika Configurator]] or [[{{{model|FMB1YX}}} Parameter list|SMS parameters]].</p>
{{{mounting_recommendations|=='''Mounting recommendations'''==
{{{connecting_wires|* <big>Connecting wires</big>
{{{plugged_in|** Wires should be connected while the module is not plugged in.}}}
:* Wires should be fastened to stable wires or other non-moving parts. Any heat emitting and/or moving objects should be kept away from the wires.
:* There should be no exposed wires. If factory isolation was removed while connecting wires, the isolation material should be applied.
:* If the wires are placed in the exterior or in places where they can be damaged or exposed to heat, humidity, dirt, etc., additional isolation should be applied and the wires should not be loose.
:* Wires cannot be connected to the board computers or control units.
}}}
{{{connecting_power_source|* <big>Connecting power source</big>
** Be sure that after the car computer goes to sleep mode, power might be still available on the power wires. Depending on car, this may happen in 5 to 30 minutes period.
** When module is connected, measure voltage again to make sure it did not decrease.
** It is recommended to connect to the main power cable in the fuse box.
** 3 A, 125 V external fuse shall be used.
}}}
{{{connecting_ignition|* <big>Connecting ignition wire</big>
**Be sure to check if it is a real ignition wire i. e. power does not disappear after starting the engine.
**Check if this is not an ACC wire (when key is in the first position, most of the vehicle electronics are available).
**Check if power is still available when you turn off any of vehicles devices.
**Ignition is connected to the ignition relay output. As alternative, any other relay, which has power output when ignition is on, may be chosen.
}}}
{{{connecting_ground_wire|* <big>Connecting ground wire</big>
**Ground wire is connected to the vehicle frame or metal parts that are fixed to the frame.
**If the wire is fixed with the bolt, the loop must be connected to the end of the wire.
**For better contact scrub paint from the spot where loop is going to be connected.
}}}
{{{pay_attention|{{Template:Pay_attention|model={{{model|FMB2YX}}}}}}}}
}}}
{{{FMB2_installation_instruction|{{Template:FMB2YX_Installation_instruction|model={{{model|FMB2YX}}}}}}}}
==Quick start guide==
==<span style=color:#FF0000>'''Safety information'''</span>==
{{Template:Mounting_recommendations
This message contains information on how to operate {{{model|FMB1YX}}} safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!
|plugged_in=
{{{SELV|* The device uses SELV limited power source. The nominal voltage is +12 V DC. The allowed voltage range is {{{voltage|+10..+30}}}V DC.}}}
*To avoid mechanical damage, it is advised to transport the device in an impact-proof package. {{{LED_indicators|Before usage, the device should be placed so that its LED indicators are visible. They show the status of device operation.}}}
{{{FMB0_3_ignition|*Before unmounting the device from the vehicle, ignition '''MUST be OFF'''.}}}
|voltage={{{voltage|+6..+30}}}
{{{connecting|* When connecting the {{{wires|wires}}}{{{2x6_wires|2x6 connector wires to the vehicle}}}{{{1x5_wires|connection (1x5) cables to the vehicle}}}, the appropriate jumpers of the vehicle power supply should be disconnected.}}}
|model=FMB920
{{{FMB2_connecting_cables|* When installing the connection cables to the vehicle, the appropriate jumpers of the power supply of the vehicle should be disconnected.}}}
|2x6_connector=
{{{unmounting|* Before unmounting the device from the vehicle, the {{{2x6_connector|2x6 connector}}} {{{1x5_connection|1x5 connection}}} must be disconnected.}}}
|2x6_wires=
{{{zone_of_limited|* The device is designed to be mounted in a zone of limited access, which is inaccessible to the operator. All related devices must meet the requirements of EN 60950-1 standard.}}}<br>
|wires=
{{{boats|* The device {{{model|FMB1YX}}} is not designed as a navigational device for boats.}}}
|FMB0_3_ignition=
|FMB0_precautions=
|FMB2_connecting_cables=
}}
{{{FMB_precautions|{{Template:Precautions_FMB}}}}}
{{{FMB0_precautions|{{Template:Precautions_FMB0}}}}}
