Changes

[[Image:Qsg_rut950_teltonika.PNG|centre]]

[[Image:Qsg_rut950_teltonika.PNG|centre]]__TOC__

 

 

 

__TOC__

 

 

=='''How to insert Micro-SIM card'''==

=='''How to insert Micro-SIM card'''==

# Gently remove '''device cover''' using '''plastic pry tool''' from both sides as it is showed in an 1st picture with FMB920 device.

# Gently remove {{{model|FMB9YX}}} '''cover''' using '''plastic pry tool''' from both sides.

# Insert '''Micro-SIM''' card as shown with '''PIN request disabled''' or read [[FMB9YX Security info|'''Security info''']] how to enter it later in Configurator. Make sure that Micro-SIM card '''cut-off corner''' is pointing forward to slot.

# Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[{{{model|FMB9YX}}} Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot.

# Connect the battery as shown on device. Position the battery in place where it does not obstruct other components.

# Attach device '''cover''' back.

# Attach device '''cover''' back. Device is ready to be connected.

 

# Gently remove {{{model|FMB9YX}}} '''cover''' using '''plastic pry tool''' from both sides.

# Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[{{{model|FMB9YX}}} Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot.

# Connect the battery as shown on device. Position the battery in place where it does not obstruct other components.  

# Attach device '''cover''' back. Device is ready to be connected.}}}

{{{SIM1|[[Image:FMB9_sim_ir_battery_insert-1.png|260px]]}}}

{{{SIM1|[[Image:FMB9_sim_ir_battery_insert-1.png|260px]]}}}

|}

|}

# Connect device to computer using '''Micro-USB cable''' or '''Bluetooth''' connection:  

#* Using '''Micro-USB cable'''

 

#** You will need to install USB drivers, see "[[Universal Device Test Guide#How to install USB drivers (Windows)|'''How to install USB drivers (Windows)''']]"

# Connect device to computer using '''{{{usb_cable|Micro-USB}}} cable''' or '''Bluetooth''' connection:  

#* Using '''{{{usb_cable|Micro-USB}}} cable'''

#** You will need to install USB drivers, see "[[#How to install USB drivers (Windows)|'''How to install USB drivers (Windows)''']]"

#* Using '''Bluetooth'''

#* Using '''Bluetooth'''

#** {{{model|FMB1YX}}} Bluetooth is enabled by default. Turn on '''Bluetooth''' on your PC, then select '''Add Bluetooth or other device > Bluetooth'''. Choose your device named – “'''{{{model|FMB1YX}}}_last_7_imei_digits'''”, without '''LE''' in the end. Enter default password '''5555''', press '''Connect''' and then select '''Done'''.

#** Device Bluetooth is enabled by default. Turn on '''Bluetooth''' on your PC, then select '''Add Bluetooth or other device > Bluetooth'''. Choose your device named – “'''DeviceFamily_last_7_imei_digits'''”, without '''LE''' in the end. Enter default password '''5555''', press '''Connect''' and then select '''Done'''. Keep in mind that the FMB640 does not support Bluetooth.

# You are now ready to use the device on your computer.

# You are now ready to use the device on your computer.

 

 

===How to install USB drivers (Windows)===

===How to install USB drivers (Windows)===

===Configuration (Windows)===

===Configuration (Windows)===

At first {{{model|FMB1YX}}} device will have default factory settings set. These settings should be changed according to the user's needs.<br/>

At first device will have default factory settings set. These settings should be changed according to the user's needs.<br/>

Main configuration can be performed via '''[[Teltonika Configurator]]''' software. Get the latest {{{model|FMB1YX}}} '''Configurator''' version from '''[[{{{SAS_Configurator_Versions|Teltonika Configurator versions}}}|here]]'''. Configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed.

Main configuration can be performed via '''[[Teltonika Configurator]]''' software. Get the latest '''Configurator''' version from '''[[{{{SAS_Configurator_Versions|Teltonika Configurator versions}}}|here]]'''. Configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed.

{| class="wikitable" style="width:50%;"

{| class="wikitable" style="width:50%;"

<br/>

<br/>

<p>After successful SMS configuration, {{{model|FMB1YX}}} device will '''synchronize time''' and '''update records''' to '''configured server'''. Time intervals and default I/O elements can be changed by using [[Teltonika Configurator]] or [[{{{model|FMB1YX}}} Parameter list|SMS parameters]].</p>

<p>After successful SMS configuration, device will '''synchronize time''' and '''update records''' to '''configured server'''. Time intervals and default I/O elements can be changed by using [[Teltonika Configurator]] or [[{{{model|FMB1YX}}} Parameter list|SMS parameters]].</p>

{{{mounting_recommendations|=='''Mounting recommendations'''==

{{{mounting_recommendations|=='''Mounting recommendations'''==