Changes

[[Image:Qsg_rut950_teltonika.PNG|centre]]__TOC__

[[Image:Qsg_rut950_teltonika.PNG|centre]]__TOC__

=='''How to insert Micro-SIM card'''==

=='''How to insert SIM card*'''==

# Gently remove '''device cover''' using '''plastic pry tool''' from both sides as it is showed in an 1st picture with FMB920 device.

# Gently remove '''device cover''' using '''plastic pry tool''' from both sides as it is showed in a 1st picture with FMB920 device.

# Insert '''Micro-SIM''' card as shown with '''PIN request disabled''' or read [[FMB9YX Security info|'''Security info''']] how to enter it later in Configurator. Make sure that Micro-SIM card '''cut-off corner''' is pointing forward to slot.

# Insert '''SIM''' card as shown with '''PIN request disabled''' or read [[FMB9YX Security info|'''Security info''']] how to enter it later in Configurator. Make sure that SIM card '''cut-off corner''' is pointing forward to slot.

# Connect the battery as shown on device. Position the battery in place where it does not obstruct other components.

# Connect the battery as shown on device. Position the battery in place where it does not obstruct other components.

# Attach device '''cover''' back. Device is ready to be connected.

# Attach device '''cover''' back. Device is ready to be connected.

{{{SIM4|[[Image:FMB9_sim_ir_battery_insert-4.png|260px]]}}}

{{{SIM4|[[Image:FMB9_sim_ir_battery_insert-4.png|260px]]}}}

{|

{|

|-

|-

| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b>

|[[File:Alert.png|left|link=]]||<b>SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise SIM card might be damaged or device will not detect it.</b>

|}

|}