Changes

Beacon are sent to server in a variable length Beacon IO '''(Teltonika data transfer ID 385)'''.  

Beacon are sent to server in a variable length Beacon IO '''(Teltonika data transfer ID 385)'''.  

Beacon records are generated according to Beacon Record parameter. When Eventual mode is used, record is generated when BLE scan finishes. This mode does not work with '''non stop scan, as it never finishes scanning procedure'''. When Periodic mode is selected, beacon records are generated according to Period settings. When where is no visible beacons, empty beacon record will be generated.

Beacon records are generated according to Beacon Record parameter. When Eventual mode is used, record is generated when BLE scan finishes. This mode does not work with '''non stop scan, as it never finishes scanning procedure'''. When Periodic mode is selected, beacon records are generated according to Period settings. When there is no visible beacons, empty beacon record will be generated.

[[Image:Universal Beacon Simple.gif]]

[[Image:Universal Beacon Simple.gif]]

Beacon ID source can be selected.

Beacon ID source can be selected.

*When Beacon ID is used, source is used as configured in Beacon ID offset and Beacon ID size columns. When Beacon MAC address is selected.

*When Beacon ID is used, source is used as configured in Beacon ID offset and Beacon ID size columns.

*Beacon ID will be replaced with MAC address. IO structure remains the same, but Beacon ID size will always be reported as 0x06.

*When Beacon MAC address is selected, Beacon ID will be replaced with MAC address. IO structure remains the same, but Beacon ID size will always be reported as 0x06.

==Universal Beacons and Beacon On Change==

==Universal Beacons and Beacon On Change==