Teltonika Configurator versions for SAS products

From Wiki Knowledge Base | Teltonika GPS
This is the approved revision of this page, as well as being the most recent.


Here you can find Teltonika Configurator software release and latest versions.

Alert.png

Before using Teltonika Configurator, please install Teltonika COM port drivers. Drivers can be downloaded from here.


Please select your device to find the correct version of Configurator:

Conf beta.png - Latest version candidate for release. This version will usually contain some new features and/or improvements but it hasn't been fully tested and approved by Teltonika's testing and technical support units.
Conf release.png - Release version which is used with current firmware release version: TMT250 firmware errata, TST100 firmware errata


For TST100


Configurator suitable for: TST100

CONFIGURATOR VERSION FIRMWARE VERSION FILE FORMAT DATE LANGUAGE CHANGES

Conf beta.png 1.4.9_C.002

<=03.25.05.Rev.129 Download zip.png 2019.12.06 EN, RU
  • Minor changes

Conf release.png 1.3.2_C.108

<=03.25.05.Rev.126 Download zip.png 2019.09.18 EN, RU
  • Added option None to Scooter
  • Added FitRider option to Scooter
  • Added Segway MAX option to Scooter Protocol parameter
  • Excluded external battery IOs for Xiaomi and MAX protocols

Conf beta.png 1.3.2_C.104

<=03.25.05.Rev.121 Download zip.png 2019.08.29 EN, RU
  • Removed unsupported BT
  • Changed Scooter temperatures IOs units to degrees multiplied by 10
  • Fixed scooter IO elements representation in I/O Info tab on Status window and Current value on E-Scooter I/O window
  • Added missing tooltips, removed unnecessary tooltips, fixed scooters IOs SMS Text and Send SMS To parameters IDs in tooltips
  • Removed codec selection parameter
  • Fixed default SMS text for scooter IO elements in localization
  • Removed UDS and some Scooter IO
  • Removed Number check setting
  • Removed Make Call to parameter
  • Fixed odometer source's tool tip
  • Changed ManDown descriptions to Falldown
  • Added IO tool tips and changed IO
  • Added TST100 HW support


For TFT100


Configurator suitable for: TFT100

CONFIGURATOR VERSION FIRMWARE VERSION FILE FORMAT DATE LANGUAGE CHANGES
To be posted To be posted Download zip.png - EN, RU
  • To be posted



For GH5200


Configurator suitable for: GH5200

CONFIGURATOR VERSION FIRMWARE VERSION FILE FORMAT DATE LANGUAGE CHANGES
Conf beta.png 1.3.6_C.266 <=03.21.04.Rev.82 Download zip.png 2019.08.02 EN, RU
  • Minor changes
Conf release.png 1.3.5_C.265 <=03.21.03.Rev.79 Download zip.png 2019.02.25 EN, RU
  • Minor changes
Conf release.png 1.0.8_C.263 <=03.21.03.Rev.75 Download zip.png 2019.02.21 EN, RU
  • Minor changes

For TMT250


Configurator suitable for: TMT250

CONFIGURATOR VERSION FIRMWARE VERSION FILE FORMAT DATE LANGUAGE CHANGES
Conf beta.png 1.3.14_C.060 <=03.21.04.Rev.255 Download zip.png 2019.08.06 EN, RU
  • Minor changes
Conf release.png 1.3.14_C.002 <=03.21.04.Rev.250 Download zip.png 2019.08.02 EN, RU
  • Added parameter "Detect International Number Type By Plus Symbol"
  • Removed "Enable In Sleep" setting for Sleep Mode scenario
  • Fixed Status window related issues
  • Fixed bad tooltips
  • Fixed Manual Geofence Polygon Points count
  • Changed "Create new configuration", "Open configuration file" appearance on home view
  • Added 10 characters trim on entering keyword
Conf release.png 0.18.20_C.002 <=03.21.03.Rev.252 Download zip.png 2019.02.21 EN, RU
  • Minor changes
Conf release.png 0.18.20_C.002 <=03.21.03.Rev.250 Download zip.png 2019.02.21 EN, RU
  • Minor changes
Conf release.png 0.16.1_C.009 <=03.21.03.Rev.00 Download zip.png 2018.11.05 EN, RU
  • Removed alarm feature 'enable' parameter because this feature is enabled, when button is configured for alarm scenario
  • Added protection for no LED and Vibro scenario
Conf release.png 0.16.1_C.004 <=03.21.01.Rev.01 Download zip.png 2018.10.22 EN, RU
  • Enabled BT 4.0 and its IO elements for TMT250
  • Increased max odometer value
  • "Power on by USB" default value changed to 1