FMC640 is a PROFESSIONAL series device with 4G network coverage including 3G (UMTS), 2G (GSM) fallback compatibility. The device equipped with GNSS/LTE and Bluetooth modules, external GNSS, and LTE antennas. FMC640 will maximize your fleet efficiency with features like FMS CAN data (J1939), fuel CAN data (J1708), tachograph live data (K-Line), remote tachograph file download, various third party RS232 or RS485 devices support, and Dual-SIM. The terminal is suitable for applications like international logistics, refrigerated transport, agriculture, construction & mining, security & emergency services, and even more. The device supports universal BLE sensors, beacon tags.
Package contents
Usually the FMC640 device sample is supplied to the customer in a cardboard box
containing all the equipment that is necessary for operation. The package contains:
FMC640 device;
4 screws for assembling device
GPS/GLONASS antenna
GSM antenna
USB cable
Ni-MH Rechargeable battery, 8.4V, 550 mA.
Input and output power supply cable with 2x10 connection pins.
4 Digital Open-collector Outputs (controlling external relays, LED, buzzers, etc.)
4 Analog Inputs
1-wire interface
Ni-Mh 550 mAh internal battery
MicroSD card
2 status LED
Dimensions: L(104,1mm)xW(76,8mm)xH(31,5mm)
Configuration and firmware update (via FOTA and USB cable)
External GSM antenna for higher sensitivity
External GNSS antenna for higher sensitivity
Special features:
Fast position fix;
High Quality track even in high density urban canyon;
Ultra small case;
Ready for harsh environment;
Easy to mount in limited access areas;
Firmly fasten;
2 LED status indication;
Real time tracking;
Smart data acquisition based on:
Time;
Speed;
Angle;
Distance;
Ignition or any other I/O event;
Sending acquired data via GPRS;
GPRS and SMS I/O events;
Virtual odometer;
Jamming detection;
Configurable using Secured SMS Commands;
2x SIM card; 1x eSIM;
Overvoltage protection (compatible with pulse 5a and pulse 5b);
Reverse polarity protection;
Description
Voltage
Duration
Normal operation
+10 ... +30 V
Unlimited
Protection turns on, device turns off
34 V
Unlimited
Maximum voltage
< 70 V
Unlimited
Maximum voltage impulse
90 V
5 ms
Technical features
Part name
Physical specification
Navigation indication
LED
Modem indication
LED
Socket
Soldered inner socket
USB
Mini USB socket
GNSS
External GNSS antenna
GSM
External GSM antenna
Technical details
2 W max. Current consumption at 12 V
GPRS: average 60 mA Nominal: average 45 mA GNSS sleep: average 32 mA Deep Sleep: average 4 mA Online Deep Sleep: average 11 mA
2 W max. Current consumption at 24 V
GPRS: average 35 mA Nominal: average 24 mA GNSS sleep: average 17 mA Deep Sleep: average 2,9 mA Online Deep Sleep: average 7 mA
Battery charge current
Average 55 mA
Operating temperature (without battery)
-40..+85
Storage temperature (without battery)
-40..+85
Storage relative humidity
5..95% (no condensation)
Device + case + battery weight
201 g
Dimension drawing:
Technical information about internal battery
Internal back-up battery
Battery voltage (V)
Nominal Capacity (mAh)
Charging temperature (°C)
Ni-MH rechargeable battery
8.4～10.0
550
0 – 45
Batteries are covered by 6 month warranty support.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Battery should not be disposed of into general household waste. Bring damaged or worn-out batteries to your local recycling center or dispose them into a battery recycle bin commonly found in supermarkets.
Battery tests
The amount of time the device will work from internal battery depends on the battery health, how often the device saves/sends information to the server, external peripherals connected to the device and the results may also differ depending on firmware used.
For general comparison purpose, and to see what results can be achieved, you can refer to the following internal test results in different modes and sending frequencies:
Mode:
Min Period (data saving frequency)
Send Period (data sending frequency)
Starting Voltage
Cut off Voltage
Time achieved
Operating
10 seconds
60 seconds
10,1V
7,0V
452 min (7 hours 32 minutes)
Operating
60 seconds
60 seconds
10,1V
7,0V
507 min (8 hours 27 minutes)
Deep Sleep
12 hours
12 hours
10,2V
8,2V
5040 min (84 hours 0 minutes)
Online Deep Sleep
12 hours
12 hours
10,0V
8,6V
1440 min (24 hours 0 minutes)
Electrical characteristics
Characteristic description
Value
Min.
Typ.
Max.
Unit
Supply Voltage:
Supply Voltage (Recommended Operating Conditions)
+10
+30
V
Digital Output (Open Drain grade):
Drain current (Digital Output OFF)
120
µA
Drain current (Digital Output ON, Recommended Operating Conditions)
