Revision as of 13:01, 5 July 2022 by Lukas.pazerauskas(talk | contribs)(Protected "FMB930 Manual" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))
FMB930 is a tracking terminal with GNSS and GSM connectivity, which is able to collect device coordinates and transfer them via GSM network to a server. This device is perfectly suitable for applications, which require the location acquirement of remote objects.
1 open collector digital output (connecting external relays, LED, buzzers etc);
1 open collector digital output (connecting external relays, LED, buzzers etc);
2 LEDs indicating device status.
Special features:
Fast position fix (Outdoor areas);
High Quality track even in high density urban canyon;
Ultra small case;
Ready for harsh environment;
Easy to mount in limited access areas;
Firmly fasten;
2 LED status indication;
Real time tracking;
Smart data acquisition based on:
Time;
Speed;
Angle;
Distance;
Ignition or any other I/O event;
Sending acquired data via GPRS;
GPRS and SMS I/O events;
Virtual odometer;
Jamming detection;
Configurable using Secured SMS Commands;
Color ribbon non-detachable cable;
Overvoltage protection;
Description
Voltage
Duration
Normal operation
+6 ... +30 V
Unlimited
Protection turns on, device turns off
34 V
Unlimited
Maximum voltage
<70 V
Unlimited
Maximum voltage impulse
90 V
5ms
Technical features
Part name
Physical specification
Navigation indication
LED
Modem indication
LED
Socket
Soldered inner socket
USB
Micro USB socket
Technical details
2 W max. Current consumption at 12 V (Power supply 10...90 V DC)
GPRS: average 63.48 mA Nominal: average 24.40 mA GNSS sleep: average 5.58 mA Deep Sleep: average 4.06 mA Online Deep Sleep: average 4.62 mA Ultra Deep Sleep: average 2.08 mA Rated current: 250 mA
Battery charge current
Average: 140 mA
Operating temperature (without battery)
-40 ... +85 °C
Storage temperature (without battery)
-40 ... +85 °C
Storage relative humidity
5 ... 95% (no condensation)
Device + case weight + battery weight
54 g
Dimension drawing:
Technical information about internal battery
Internal back-up battery
Battery voltage (V)
Nominal Capacity (mAh)
Power (Wh)
Charge temperature (°C)
Discharge temperature (°C)
Storage temperature (°C)
Li-ion rechargeable battery
3.75～3.90
170
0.64 – 0.66
0 to +45
-20 to +60
-20 to +45 for 1 month -20 to +35 for 6 months
Batteries are covered by 6 month warranty support.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Battery should not be disposed of into general household waste. Bring damaged or worn-out batteries to your local recycling center or dispose them into a battery recycle bin commonly found in supermarkets.
Electrical characteristics
Characteristic description
Value
Min.
Typ.
Max.
Unit
Supply Voltage:
Supply Voltage (Recommended Operating Conditions)
6
30
V
Digital Output (Open Drain grade):
Drain current (Digital Output OFF)
120
µA
Drain current (Digital Output ON, Recommended Operating Conditions)
0.1
0.5
A
Digital Input:
300
mΩ
Digital Output (Open Drain grade):
Input resistance (DIN1)
47
kΩ
Input voltage (Recommended Operating Conditions)
0
Supply voltage
V
Input Voltage threshold (DIN1)
4
V
Analog Input:
Input voltage (Recommended Operating Conditions)
0
30
V
Input resistance
150
kΩ
Measurement error on 12 V
3
%
Additional error on 12 V
360
mV
Measurement error on 30 V
3
%
Additional error on 30 V
900
mV
Analog Input error margin can increase if temperature varies.
Absolute maximum ratings
Characteristic description
Value
Min.
Typ.
Max.
Unit
Supply Voltage (Absolute Maximum Ratings)
-32
+32
V
Drain-Source clamp threshold voltage (Absolute Maximum Ratings), (Idrain = 2 mA)
