FMB962 Accessories

From Wiki Knowledge Base | Teltonika GPS
Revision as of 06:57, 6 May 2019 by Airidas.S (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > EOL Products > FMB962 > FMB962 Manual > FMB962 Accessories
Bw nb.png Please order accessories separately as they are not included into device package.
Accessory and its description Accessory connection schematic
Alarm buttons, door sensors etc. Panic button connection to FMB962
Alarm buttons, door sensors, ignition, etc. have two output states: high or low. FMB962 Digital inputs are used to detect these states.
Sch fmb1yx panic.png
Relays Inverting relay connection to FMB962
In cases when sensor output signal is negative, an additional relay has to be installed to convert negative signal to positive.
Sch fmb1yx inv relay.png
Immobilizer relay Immobilizer relay connection to FMB962 output
When connected as shown on the right hand side, FMB962 disables engine starter when output is ON.
Sch fmb1yx imb relay.png
Automotive relay Automotive relay pinout
An ordinary automotive relay is used to invert input signal or to immobilize engine starter. Note that relays can be 12 V or 24 V capable.
Pic relay.png
Sch ord relay.png