FMC001 Beacon List

From Wiki Knowledge Base | Teltonika GPS
Revision as of 15:38, 13 December 2019 by Tomas.kriauciunas (talk | contribs) (Created page with "==Beacon Settings== '''Beacon Detection''' 0 (Disabled) – Functionality disabled. 1 (All) – All visible beacons are detected (Max. 100). 2 (Configured) – Only beacon...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > OBD Trackers > FMC001 > FMC001 Configuration > FMC001 Beacon List

Beacon Settings

Beacon Detection

0 (Disabled) – Functionality disabled.

1 (All) – All visible beacons are detected (Max. 100).

2 (Configured) – Only beacons from the list are sent to server

Beacon Record

0 (Eventual) – Disabled. (Record is sent after scan procedure is completed).

1 (Periodic) – All beacons are sent to server. (Record will be saved accordint to configured period).

Record Period - Beacon record saving period

Record Period on Move & Record Period on Stop. Timers for record generation when device is moving and staying at place.

Record Period on Move (Default value 60 seconds)

Record Period on Stop (Default value 60 seconds)

Beacon Settings

Beacon List

List of authorized beacons. Eddystone and iBeacon protocols are supported*.

Beacon List

*Beacon Ids can be entered the following way: Namspace:CompanyID, UUID:Major:Minor. Any of the ID parts can be omitted ex., Namespace:. UUID::, UUID::Minotr, etc