Difference between revisions of "FMC001 Speed Elements"

From Wiki Knowledge Base | Teltonika GPS
m (Protected "FMC001 Speed Elements" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))
 
Line 5: Line 5:
 
* There is a I/O element with ID 37. This is a 1 byte element - it is speed from OBDII data. It is wise to use this element as the base for correct speed readings, as GPS data sometimes might be not very accurate.
 
* There is a I/O element with ID 37. This is a 1 byte element - it is speed from OBDII data. It is wise to use this element as the base for correct speed readings, as GPS data sometimes might be not very accurate.
 
[[Image:Wiki_obdspeed.png|x150px|none]]
 
[[Image:Wiki_obdspeed.png|x150px|none]]
[[Category:FMC001 Manual]]
+
[[Category:FMC001 Manual| 9]]

Latest revision as of 14:49, 7 December 2021

Main Page > OBD Trackers > FMC001 > FMC001 Manual > FMC001 Speed Elements
  • In the GPS element, there is a 2-byte speed. - this is speed based on GPS data, it is always included in the packet.
Wiki gps speed.png
  • If I/O element "Speed" is enabled. In AVL data packets IO element with ID 24 is going to be included. It is a 2-byte I/O element - it is the same speed from GPS, just that it is included as IO element to have the possibility to create events for it.
Wiki io speed.png
  • There is a I/O element with ID 37. This is a 1 byte element - it is speed from OBDII data. It is wise to use this element as the base for correct speed readings, as GPS data sometimes might be not very accurate.
Wiki obdspeed.png