GPS Electronic Logbook

From Wiki Knowledge Base | Teltonika GPS
Main Page > General Information > Usage scenarios > GPS Electronic Logbook

Project description

It is a good practice for the companies all over the world a vehicle log to be kept for each automobile so that a fleet manager can keep tracking the operational cost of any particular car and/or the entire fleet. Although, manually handled paper reports leave a lot of space for failure. Starting of basic human errors, paperwork overload, lack of drivers accountability, communication and coordination issues, chaotic routing, excessive idling and up to no clear differentiation between business and personal vehicle use. These challenges will inevitably take an effect on the fleet operational cost, company cash flow, competitive advantage and reputation. All these obstacles can not be ignored and should be taken into account. And that is where Teltonika GPS electronic logbook solution comes into the play.

Teltonika GPS electronic logbook offers two operational modes: Private Mode and Business Mode. In the latter mode - location and the date of departure, driver's ID, mileage at the beginning and the end of the journey (distance travelled in total), green driving parameters, purpose of the trip will be tracked automatically. If Private Mode is chosen by the driver, the logbook will be turned off and no events will be registered.

We are glad that You decided to test our "GPS electronic logbook" solution.

Here You will find how to prepare and to test this solution.

What will You need for the solution?

  • Teltonika FM device which is compatible with this use case. Recommended products are: FMB001, FMC001, FMM001, FM3001, FMU126, FMB002, FMB010, FMB003 or FMB020.
  • The SIM card in order to receive data to Your server.
  • Teltonika Configurator to set up FM device correctly for the solution.
  • FOTA WEB to remotely send the configuration to the device.
  • BTAPP / Driver application for Private Mode or Business Mode selection.

Installation

Most of recommended products are "Plug and Play" devices. It means that devices are directly plugged into vehicles OBDII socket and after configuration is complete - devices are set for use. Although, if plugged OBDII device is too hard to reach and vehicle parts are interfering with GPS signal or vehicle parts need to be removed/opened to access OBDII socket and afterwards parts no longer fit or close - Teltonika offers OBDII extension cable. [1]

Keep in mind, that FMU126 device is not "Plug and Play" type and requires more advanced installation. [2] Also, particular FM device is specially built for Thailand region.

Apart from device configuration (more later) and installation into vehicle, GPS electronic logbook doesn't require additional hands on work.

Configuration

Prerequisites

Before configuring GPS electronic logbook solution it is mandatory to set up GPRS settings for a device. Quick first start guide can be found here.

Configuring GPS electronic logbook

After familiarizing with devices first start guide and device's GPRS settings are set - configuration for GPS electronic logbook can be done. Configuration:

Trip settings.png

Parameter ID - Parameter name

Trip settings:

  • 11800 - Scenario priority (0 - Disable, 1 - Low, 2 - High, 3 - Panic).


  • 11801 - Eventual settings (0 - Disable, 1 - Enable), if disabled - trip settings will come with periodical data.


  • 11802 - Mode (0 - Continuous, 1 Between Records). If Between Records option is selected distance will be counted until any record is made. Then odometer will be reset to zero and start counting until next record is made.
  • 11803 - Start Speed (km/h).
  • 11804 - Ignition OFF timeout (s).
  • 7031 - ID of SMS recipient.
  • 8031 - SMS Text.
  • 700 - Eco Score Allowed Events.


  • 11806 - Odometer Calculation Source (0 - GNSS, 1 - OBD).
  • 11807 - current Odometer Value (km). Odometer data will be counted from provided value.
Green - Eco driving.png





Eco/Green Driving settings:

  • 11000 - Scenario priority (0 - Disable, 1 - Low, 2 - High, 3 - Panic).


  • 11004 - Maximum Acceleration (m/s2).
  • 11005 - Maximum Braking (m/s2)
  • 11006 - Maximum Cornering (m/s2)
  • 11007 - Source (0 - GPS, 1 - Accelerometer). Green driving scenario according to selected data source.


  • 11019 - Advanced Eco Driving (0 - Disable, 1 - Enable). If enabled, Eco Driving Average (ID.: 11011) and / or Eco Driving Maximum (ID.: 11015) settings can be changed.
  • 11008 - Eco/Green Driving Duration (0 - Disable, 1 - Enable).
  • 7034 - ID of SMS recipient.
  • 8034 - SMS Text.
    Note: Maximum acceleration, braking and cornering values should be set according to vehicle type, power, weight and etc. Best values can be approached by practical testing.
Idlingg.png


Excessive Idling settings:

  • 11200 - Scenario priority (0 - Disable, 1 - Low, 2 - High, 3 - Panic).


  • 11203 - Eventual settings (0 - Disable, 1 - Enable), if disabled - excessive idling data will come with periodical data.
  • 11205 - Time To Stopped (s). Represents how long vehicle should not move with engine ON.
  • 11206 - To To Moving (s). Represents how long vehicle should be moving with engine ON, to exit idle state.
  • 7033 - ID of SMS recipient.
  • 8033 - SMS Text.


Quick start: From default configuration to GPS electronic logbook records in one SMS:

"  setparam 11800:1;11801:0;11806:1;11000:2;11007:1;11200:2"

This SMS will set up Your device to send Trip, Eco/Green driving and Excessive idling data to Your previously provided server.

Note: Before SMS text, two space symbols should be inserted if no SMS username or password was set in SMS / Call settings.

BTAPP Mobile application

Business private.png

After making configuration for Your device, it is time to download BTAPP. Keep in mind, app and device connection is established via Blue-tooth. Devices by default come with Blue-tooth enabled and visible. After pairing to device - You can change the trip type of Your trips by performing a long press on the icon and confirming the change.










Parsing GPS electronic logbook records

Prerequisites

First of all, in order to parse packets with GPS electronic logbook records it is mandatory to open TCP or UDP port. Instructions can be found here.

After establishing TCP or UDP port, packets can be parsed automatically. In order to learn how it is done, please visit Java Parser First Start Guide.

Parsing example

Unparsed received data in hexadecimal stream
000000000000005E08010000017716AE03D8010F0F22D720982E9C007E00120A002FFD1609E

F01F00150011505C80045010101FD03FE230BB5000BB60006423A0018002F430F8A4400000

901301100161200EC13FBD90F038402C7000003BD1003066802000100005F75

AVL Data Packet Part HEX Code Part
Zero Bytes 00 00 00 00
Data Field Length 00 00 00 5E
Codec ID 08 (Codec 8)
Number of Data 1 (Number of Total Records) 01
Timestamp 00 00 01 77 16 AE 03 D8 (Mon Jan 18 18:07:19 UTC 2021)
Priority 01
Longitude 0F 0F 22 D7
Latitude 20 98 2E 9C
Altitude 00 7E
Angle 00 12
Satellites 0A
Speed 00 2F
Event IO ID FD (AVL ID: 253, Name: Green driving type)
N of Total ID 16
N1 of One Byte IO 09
1’st IO ID EF (AVL ID: 239, Name: Ignition)
1’st IO Value 01
2’nd IO ID F0 (AVL ID: 240, Name: Movement)
2’nd IO Value 01
3’rd IO ID 15 (AVL ID: 21, Name: GSM Signal)
3’rd IO Value 05
4'th IO ID 50 (AVL ID: 80, Name: Data mode)
4'th IO Value 01
5'th IO ID C8 (AVL ID: 200, Name: Sleep Mode)
5'th IO Value 00
6'th IO ID 45 (AVL ID: 69, Name: GNSS Status)
6'th IO Value 01
7'th IO ID 01 (AVL ID: 1, Name: Digital Input 1)
7'th IO Value 01
8'th IO ID FD (AVL ID: 253, Name: Green driving type)
8'th IO Value 03 (01 - harsh acceleration, 02 - harsh braking, 03 - harsh cornering)
9'th IO ID FE (AVL ID: 254, Name: Green Driving Value)
9'th IO Value 23 ( Depending on green driving type: if harsh acceleration or braking - g*100 (value 123 ->1,23g). If Green driving source is "GPS" - harsh cornering value is rad/s*100. If source is "Accelerometer" - g*100.
N2 of Two Byte IO 0B
1’st IO ID B5 (AVL ID: 181, Name: GNSS PDOP)
1’st IO Value 00 0B
2’nd IO ID B6 (AVL ID: 182, Name: GNSS HDOP)
2’nd IO Value 00 06
3’rd IO ID 42 (AVL ID: 66, Name: External Voltage)
3’rd IO Value 3A 00
4'th IO ID 18 (AVL ID: 24, Name: Speed)
4'th IO Value 00 2F
5'th IO ID 43 (AVL ID: 67,Name: Battery Voltage)
5'th IO Value 0F 8A
6'th IO ID 44 (AVL ID: 68, Name: Battery Current)
6'th IO Value 00 00
7'th IO ID 09 (AVL ID: 9, Analog input 1
7'th IO Value 01 30
8'th IO ID 11 (AVL ID:17, Name: Axis X)
8’th IO Value 00 16
9'th IO ID 12 (AVL ID:18, Name: Axis Y)
9’th IO Value 00 EC
10'th IO ID 13 (AVL ID:19, Name: Axis Z)
10'th IO Value FB D9
11'th IO ID 0F (AVL ID: 15, Name: Eco score)
11'th IO Value 03 84
N4 of Four Byte IO 02
1'st IO ID 02 C7(AVL ID: 199, Name: Trip Odometer)
1’st IO Value 00 00 03 BD
2’nd IO ID 10 03(AVL ID: 16, Name: Total Odometer)
2’nd IO Value 06 68 80 20
Number of Data 2 (Number of Total Records) 01
CRC-16 00 00 5F 75

In platform

Packet information can be displayed visually. In the picture below, event location is displayed on the map. Dot on the map represents a record. By clicking on it, it is possible to see what kind of information is gathered in the particular entry.

Viz.png

In order to visually see received information on the platforms:

  • TAVL: Open TAVL → select client → select Street Map → select device → choose the date from which to which to show the records → push advanced → push show button and then you will see in left down corner all information.
  • WIALON: Open WIALON → open messages → push unit ( select your device) → choose the date from which to which to show the records → select message  (data messages) → push execute button and you will see all information.