Changes

no edit summary
Line 1: Line 1:  +
 
[[Category: Usage scenarios]]
 
[[Category: Usage scenarios]]
   Line 22: Line 23:  
==Installation==
 
==Installation==
   −
[[File:MountingOBD.png|thumb]]
+
[[File:FMB140-wiring-scheme.jpg|thumb]]
 
  −
Installing the device is easy, but don't forget about [https://wiki.teltonika-gps.com/view/FMB003_First_Start mounting recommendations] as well. If the location of the OBDll interface is in a hard-to-reach place, then you can always use a special cable to install the device in a convenient place. [https://teltonika-gps.com/product/obdii-cable/ OBDII connection extension cable]
     −
Although devices have high gain antennas it’s important to mount devices with stickers on top and in metal-free space. The device should be firmly fixed to the surface or cables. Please make sure, that device is not fixed to heat emitting or moving parts.
     −
During installation please follow recommendations in order to '''avoid damaging''' device and vehicle:
+
When installing FMB140 in a vehicle, follow the[https://wiki.teltonika-gps.com/view/FMB003_First_Start ''' mounting recommendations. ''']When connecting to the CAN bus, you must use the diagrams provided by our technical support engineers. The diagrams indicate in detail and clearly the connection points in the vehicle wiring and the required program number. It is also possible to obtain data from the vehicle CAN bus by performing an [https://wiki.teltonika-gps.com/view/FMB140_autoscan_feature_instructions '''auto scan procedure.'''] FMB140 has the function of working with wireless BLE sensors, supports connection of temperature sensors and iButton reader via 1-wire.
* The device uses SELV limited power source. The nominal voltage is +12 V DC. The allowed voltage range is +10..+30V DC.
  −
* To avoid mechanical damage, it is advised to transport the device in an impact-proof package. Before usage, the device should be placed so that its LED indicators are visible. They show the status of device operation.
  −
* Before unmounting the device from the vehicle, ignition MUST be OFF.
      
<br />
 
<br />
Anonymous user

Navigation menu