0
edits
Changes
Template:FMA1 CAN adapters (view source)
Revision as of 11:49, 23 August 2018
, 11:49, 23 August 2018→{{{model|FMB1YX}}} ALL-CAN300 and LV-CAN200 parameters configuration
1. In car, connect LV-CAN200 or ALL-CAN300 to CAN bus and to the {{{model|FMB1YX}}} device , wait 10 seconds. Note, that car engine must be started.<br/>
1. In car, connect LV-CAN200 or ALL-CAN300 to CAN bus and to the {{{model|FMB1YX}}} device , wait 10 seconds. Note, that car engine must be started.<br/>
2. Disconnect LV-CAN200 or ALL-CAN300 from {{{model|FMB1YX}}} , and connect PC USB cable to {{{model|FMB1YX}}} Device. It is very important not to disconnect {{{model|FMB1YX}}} from power source, because then all CAN data will be lost.
2. Disconnect LV-CAN200 or ALL-CAN300 from {{{model|FMB1YX}}} , and connect PC USB cable to {{{model|FMB1YX}}} Device. It is very important not to disconnect {{{model|FMB1YX}}} from power source, because then all CAN data will be lost.
[[Image:Fma_LVCAN_Connection.png|400px|center]]
[[Image:Fma1_LVCAN_Connection.png|400px|center]]
CAN bus data which can be read from your car is shown in “Light or ALL Vehicles Can adapter supported cars” document. <br/>
CAN bus data which can be read from your car is shown in “Light or ALL Vehicles Can adapter supported cars” document. <br/>
