Template:FMA2 First start card
From Wiki Knowledge Base | Teltonika GPS
Revision as of 13:56, 5 September 2018 by Artur.tomasevski (talk | contribs) (Created page with "centre <b><font size="+10">{{{model|FMB20X}}} Small and professional waterproof tracker with high gain {{{GPS_antenna|internal}}} {{{antenn...")
FMB20X Small and professional waterproof tracker with high gain internal GNSS/GSM antennas, Bluetooth and high capacity internal Ni-MH battery
Quick Start Guide
How to insert micro SIM card into FMB20X
1. Open FMB20X case using screwdriver.
2. Remove FMB20X case.
3. Insert SIM card as shown.
4. Connect battery connector as shown.
5. Attach case, and screw in the screws.
6. Device is ready.
Cable colors
| Wire color | Pin name | Description |
|---|---|---|
| Red | VCC (10-30)V DC (+) | Power supply (+6...30 V DC). |
| Black | GND (-) | Ground. |
| Yellow | DIN 1 | Digital input, channel 1. |
| White/Green | DIN 2 | Digital input, channel 2. |
| White | DIN 3 | Digital input, channel 3. |
| Grey | AIN 1 | Analog input, channel 1. Input range: 0-30 V DC. |
| White/Orange | DOUT 1 | Digital output, channel 1. Open collector output. Max. 3,3 A DC. |
| Violet | DOUT 2 | Digital output, channel 2. Open collector output. Max. 3,3 A DC. |
| Green | 1WIRE DATA | Data channel for 1–Wire devices. |
| Blue | 1WIRE POWER | +3,8 V output for 1–Wire devices. |
