Difference between revisions of "Template:FMB002 First start card"
From Wiki Knowledge Base | Teltonika GPS
Kudalevas.da (talk | contribs) |
Kudalevas.da (talk | contribs) |
||
| Line 29: | Line 29: | ||
|- | |- | ||
| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b> | | [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b> | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
|} | |} | ||
Revision as of 14:19, 2 April 2020
Advanced Plug and Track real-time tracking terminal with GNSS, GSM and Bluetooth connectivity
How to insert Micro-SIM card and connect battery
- Insert the SIM tray removal tool into the hole on the SIM card tray, and then push until the tray pops out.
- Insert Nano-SIM card as shown with PIN request disabled or read our Wiki how to enter it later in Teltonika Configurator. Make sure that Nano-SIM card is fitted properly into the tray.
- Attach the SIM card tray back.
- Open device top cover to access battery connector. Cover is opened by unclipping it at the recessed corner
- Connect the battery as shown to device.
- After configuration, see “PC Connection (Windows)”, attach device cover back.
Device is ready to be mounted.
 |
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it. |
