Difference between revisions of "Template:FMB002 First start card"
From Wiki Knowledge Base | Teltonika GPS
Kudalevas.da (talk | contribs) |
Kudalevas.da (talk | contribs) |
||
| Line 12: | Line 12: | ||
=='''How to insert Micro-SIM card and connect battery'''== | =='''How to insert Micro-SIM card and connect battery'''== | ||
| − | # | + | # Open the top cover of the device. Cover is opened by unclipping it at the recessed corner. |
| − | # Insert '''Nano-SIM card | + | # Insert '''Nano-SIM card'' as shown with '''PIN request disabled''' or read our Wiki how to enter it later in Teltonika Configurator. Make sure that Nano-SIM card is fitted properly into the holder. |
| − | + | # Connect the battery as shown in the figure. | |
| − | |||
| − | # Connect the battery as shown | ||
# After '''configuration''', see “PC Connection (Windows)”, attach device '''cover''' back. | # After '''configuration''', see “PC Connection (Windows)”, attach device '''cover''' back. | ||
| + | |||
Revision as of 11:25, 9 April 2020
Advanced Plug and Track real-time tracking terminal with GNSS, GSM and Bluetooth connectivity
How to insert Micro-SIM card and connect battery
- Open the top cover of the device. Cover is opened by unclipping it at the recessed corner.
- Insert Nano-SIM card as shown with PIN request disabled' or read our Wiki how to enter it later in Teltonika Configurator. Make sure that Nano-SIM card is fitted properly into the holder.
- Connect the battery as shown in the figure.
- After configuration, see “PC Connection (Windows)”, attach device cover back.
Device is ready to be mounted.
 |
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it. |
