Template:FMB002 First start card

From Wiki Knowledge Base | Teltonika GPS
Revision as of 18:07, 30 October 2020 by SandraG (talk | contribs)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Qsg rut950 teltonika.PNG


Advanced Plug and Track real-time tracking terminal with GNSS, GSM and Bluetooth connectivity

FMB002 600x600 1.png




How to insert Nano-SIM card and connect battery

  1. Open the top cover of the device. The cover is opened by unclipping it at the recessed corner.
  2. Insert Nano-SIM card as shown with PIN request disabled' or read our Wiki how to enter it later in Teltonika Configurator. Make sure that the Nano-SIM card is fitted properly into the holder.
  3. Connect the battery as shown in the figure.
  4. After configuration, see “PC Connection (Windows)”, attach device cover back.


The device is ready to be mounted.


Fmb020 card 1.pngFmb020 card 2.pngFmb020 card 3.pngFmb020 card 4.png


Alert.png
Nano-SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise Nano-SIM card might be damaged or device will not detect it.