Qsg rut950 teltonika.PNG


GNSS/GSM/Bluetooth tracker with internal GNSS/GSM antennas

Fmb120 man.png



How to insert Micro-SIM card and connect the battery

  1. Gently remove FMB1YX cover using plastic pry tool from both sides.

    Note: To properly open a new case please watch this video.

  2. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Teltonika Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.
  3. Connect battery as shown to device. Position the battery in place where it does not obstruct other components.
  4. After configuration, see “PC Connection (Windows)”, attach device cover back.

Device is ready to be installed.

Fmb120 cover 1.pngFmb120 cover 2.pngFmb120 cover 3.pngFmb120 cover 4.png

Alert.png
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.