Template:FMB209 First start card
Revision as of 17:50, 6 May 2021 by Paulius Sakalauskas
Teltonika FMB209 is a SPECIAL waterproof tracker with Bluetooth connectivity and integrated backup battery. Device was designed to meet Indian government regulation AIS 140
How to insert Micro-SIM card and connect the battery
- Unscrew 6 screws counterclockwise that are located on the bottom of the FMB209 device.
- Remove the cover.
- Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Teltonika Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
- Connect battery as shown to device.
- After configuration, see “PC Connection (Windows)”, attach device cover back and screw in all screws.
Device is ready to be mounted.
|Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.|
|PIN NUMBER||PIN NAME||DESCRIPTION|
|Red||VCC (10-30)V DC (+)||Power supply (+10...30 V DC)|
|Yellow||DIN 1||Digital input, channel 1|
|White/Green||DIN 2||Digital input, channel 2|
|White||DOUT 1||Digital Output Channel 1|
|Grey||AIN 1/DIN 3||Analog input, channel 1. Input range: 0-30 V DC/Digital input channel 3|
|White/Orange||RS232-TX||Output for data transmission through RS-232|
|Violet||RS232-RX||Input for data reception through RS-232|
|Green||AIN 2/DIN 4||Analog input, channel 2. Input range: 0-30 V DC/Digital input channel 4|
|Blue||DOUT 2||Digital output 2|