Difference between revisions of "Template:FMB630 K-Line Data"

From Wiki Knowledge Base | Teltonika GPS
 
Line 12: Line 12:
 
[[Image:kline_tab.png|center]]
 
[[Image:kline_tab.png|center]]
  
===K-Line front panel supported with Firmware version 00.02.xx or lower===
+
===K-Line front panel supported with Firmware version 00.02.xx===
  
 
==External links==
 
==External links==
 
https://wiki.teltonika-gps.com/view/FM63_firmware_errata<br />
 
https://wiki.teltonika-gps.com/view/FM63_firmware_errata<br />
 
https://wiki.teltonika-gps.com/view/FM63XX/FMB630_and_FMB640_and_Tachograph_Solution <br />
 
https://wiki.teltonika-gps.com/view/FM63XX/FMB630_and_FMB640_and_Tachograph_Solution <br />

Latest revision as of 07:43, 15 July 2019

K-Line Data functionality allows user to monitor and use incoming data from Tachograph via K-line. Kline periodic record timeout parameter is used to set interval between K-Line records. Those records aren't included in standard record and will be sent as separate packet.

To configure any K-Line parameter, every parameter should be separated with comma. For example, configuring first profile Kline Driver 2 ID by SMS, SMS should look like: “ setparam 1062 1,,,3” (“ setparam 1062 <Priority>,<HighLevel>,<LowLevel>,<generateEvent>”) Driver 2 ID do not have High/Low level so they are skipped by using comma “,,“ Other Kline properties can be configured in the same logic.


Kline tab.png

K-Line front panel supported with Firmware version 00.02.xx

External links

https://wiki.teltonika-gps.com/view/FM63_firmware_errata
https://wiki.teltonika-gps.com/view/FM63XX/FMB630_and_FMB640_and_Tachograph_Solution