View source for Template:FMB965 First start card

=='''How to insert Micro-SIM card'''==

{{{with_battery|
# Gently remove {{{model}}} '''cover''' using '''plastic pry tool''' from both sides.
# gently lift the PCB out of the cover
# Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[{{{model|FMB965}}} Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing outwards to slot.
# Connect the battery as shown on device.
# Place PCB back into the place as shown in the picture, first the end that is marked as '''1''' needs to inserted, then the end that is marked as '''2'''
# Attach device '''cover''' back. Device is ready to be connected.}}}

{{{SIM1|[[Image:FMB965_sim_ir_battery_insert-1.png|260px]]}}}
{{{SIM2|[[Image:FMB965_sim_ir_battery_insert-2.png|260px]]}}}
{{{SIM3|[[Image:FMB965_sim_ir_battery_insert-3.png|260px]]}}}
{{{SIM4|[[Image:FMB965_sim_ir_battery_insert-4.png|260px]]}}}
{{{SIM4|[[Image:FMB965_sim_ir_battery_insert-5.png|260px]]}}}
{{{SIM4|[[Image:FMB965_sim_ir_battery_insert-6.png|260px]]}}}


{|
|-
| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b>
|}