Difference between revisions of "Template:FMB965 First start card"

From Wiki Knowledge Base | Teltonika GPS
Line 10: Line 10:
  
 
=='''How to insert Micro-SIM card'''==
 
=='''How to insert Micro-SIM card'''==
 
{{{without_battery|
 
# Gently remove {{{model|FMB9YX}}} '''cover''' using '''plastic pry tool''' from both sides.
 
# Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[{{{model|FMB9YX}}} Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot.
 
# Attach device '''cover''' back.
 
# Device is ready to be connected.}}}
 
  
 
{{{with_battery|
 
{{{with_battery|

Revision as of 09:19, 2 March 2022

Qsg rut950 teltonika.PNG

Small and smart tracker with Bluetooth




How to insert Micro-SIM card

  1. Gently remove FMB9YX cover using plastic pry tool from both sides.
  2. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
  3. Connect the battery as shown on device. Position the battery in place where it does not obstruct other components.
  4. Attach device cover back. Device is ready to be connected.

FMB965 sim ir battery insert-1.png FMB965 sim ir battery insert-2.png FMB965 sim ir battery insert-3.png FMB965 sim ir battery insert-4.png FMB965 sim ir battery insert-5.png FMB965 sim ir battery insert-6.png


Alert.png
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.