Difference between revisions of "Template:FMC640 Auto Geofence settings"

From Wiki Knowledge Base | Teltonika GPS
(Created page with "{{{pic_autogeofence|300px|right}}} AutoGeofence – the last known position after movement = off. If your car is being taken away – you ca...")
 
 
Line 3: Line 3:
 
AutoGeofence – the last known position after movement = off. If your car is being taken away – you can be notified. The shape and size of the geofence zones are configurable. There is a possibility to state whether entering in or out of the geofence triggers an asynchronous message.
 
AutoGeofence – the last known position after movement = off. If your car is being taken away – you can be notified. The shape and size of the geofence zones are configurable. There is a possibility to state whether entering in or out of the geofence triggers an asynchronous message.
 
Auto Geofencing option can be configured by following parameters:
 
Auto Geofencing option can be configured by following parameters:
 +
 
*Priority – Priority of generated event, which will be applied to saved record.
 
*Priority – Priority of generated event, which will be applied to saved record.
 
*Eventual Records - Scenario status will be (or not, if disabled) sent with each AVL
 
*Eventual Records - Scenario status will be (or not, if disabled) sent with each AVL
 +
 
record.
 
record.
 
Generate Event:
 
Generate Event:
 +
 
*On Entrace – Event generation on Geofence entrance.
 
*On Entrace – Event generation on Geofence entrance.
 
*On Exit – Event generation on Geofence exit.
 
*On Exit – Event generation on Geofence exit.
 
*On Both - Event generation on Geofence entrance or exit.
 
*On Both - Event generation on Geofence entrance or exit.
 
*Activation Timeout – Time period before Geofence is activated after vehicle stops.
 
*Activation Timeout – Time period before Geofence is activated after vehicle stops.
*Radius - Radius of circle where in center of it is last coordinates of device when vehicle  
+
*Radius - Radius of circle where in center of it is last coordinates of device when vehicle
 +
 
 
engine was running.
 
engine was running.
 
Deactivate By:
 
Deactivate By:
 +
 
*Ignition – if ignition becomes high it will drop AutoGeofenze Zone
 
*Ignition – if ignition becomes high it will drop AutoGeofenze Zone
 
*iButton – if iButton is attached it will drop AutoGeofence Zone
 
*iButton – if iButton is attached it will drop AutoGeofence Zone
 +
*Engine RPM - if engine RPM becomes more than zero it will drop AutoGeofence zone

Latest revision as of 11:50, 26 June 2020

Fmb640 autogeofence.png

AutoGeofence – the last known position after movement = off. If your car is being taken away – you can be notified. The shape and size of the geofence zones are configurable. There is a possibility to state whether entering in or out of the geofence triggers an asynchronous message. Auto Geofencing option can be configured by following parameters:

  • Priority – Priority of generated event, which will be applied to saved record.
  • Eventual Records - Scenario status will be (or not, if disabled) sent with each AVL

record. Generate Event:

  • On Entrace – Event generation on Geofence entrance.
  • On Exit – Event generation on Geofence exit.
  • On Both - Event generation on Geofence entrance or exit.
  • Activation Timeout – Time period before Geofence is activated after vehicle stops.
  • Radius - Radius of circle where in center of it is last coordinates of device when vehicle

engine was running. Deactivate By:

  • Ignition – if ignition becomes high it will drop AutoGeofenze Zone
  • iButton – if iButton is attached it will drop AutoGeofence Zone
  • Engine RPM - if engine RPM becomes more than zero it will drop AutoGeofence zone