Difference between revisions of "Template:FMT1 First start card"

From Wiki Knowledge Base | Teltonika GPS
m
Line 2: Line 2:
  
  
<b>{{{description|Special and small waterproof GNSS tracker with built-in accelerometer.}}}</b>{{{pic|[[Image:FMT100-1-demo.png|400px|right]]}}}
+
<b>{{{description|Special and small waterproof GNSS tracker with built-in accelerometer.}}}</b>{{{pic|[[Image:FMT100-01.png|400px|right]]}}}
  
  

Revision as of 12:11, 30 June 2021

Qsg rut950 teltonika.PNG


Special and small waterproof GNSS tracker with built-in accelerometer.

FMT100-01.png




Know your device

FMT100 know your device-2.png


Pinout

PIN NUMBER PIN NAME DESCRIPTION
FMT100 pinout.png
1 VCC (10-30)V DC (+) (Red) Power supply (+10-30 V DC)
2 GND (-) (Black) Ground


Set up your device

How to insert Micro-SIM card and connect the battery

  1. Unscrew 6 screws counterclockwise.
  2. Remove the cover.
  3. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later with Teltonika Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
  4. Connect the battery as shown to device. Position the battery in place where it does not obstruct other components.
  5. After configuration, see PC Connection (Windows), attach device cover back and screw in all screws.
  6. Device is ready to be mounted.


FMT100 sim insert-1.png     FMT100 sim insert-2.png     FMT100 sim insert-3.png     FMT100 sim insert-4.png     FMT100 sim insert-5.png     FMT100 sim insert-6.png

Alert.png
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.