View source for WEB Tacho Introduction

==Introduction==
Teltonika WEB Tacho is an online service that allows to remotely downloading
Tachograph files from supported tachographs, using Teltonika professional trackers. Files are
stored on server side, in defined format (.DDD, .V1B, .C1B, .TGD). Files can be downloaded –
directly from the website, receive in Email, receive to defined FTP server.

==Requirements==
{| class="nd-othertables_2"
|+
! style="width: 200px; border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" | REQUIREMENT TYPE
! style="width: 500px; border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" | DESCRIPTION
|-
! style="border-bottom: 1px solid #E8E8E8; vertical-align: top; text-align: left; color: black;" | Hardware
| style="text-align: left; vertical-align: top;" | FM5300+KNL200, FM6300, FM6320, FMB630, FMB640, FMM640, FMC640, FMB641, FMC650, FMM650
|-
! style="border-bottom: 1px solid #E8E8E8; vertical-align: top; text-align: left; color: black;" | Bootloader version
| style="text-align: left; vertical-align: top;" | FM5300 - 06.00*, for FM63 works with every bootloader
|-
! style="border-bottom: 1px solid #E8E8E8; vertical-align: top; text-align: left; color: black;" | Firmware version
| style="text-align: left; vertical-align: top;" | 01.02.11 or later, works with every firmware
|-
! style="border-bottom: 1px solid #E8E8E8; vertical-align: top; text-align: left; color: black;" | Tachograph
| style="text-align: left; vertical-align: top;" | Siemens VDO Digital Tachograph - DTCO 1381 (release 1.3a, 1.4 or later) Stoneridge Tachograph - SE5000 (release 7.1 or later)
|-
! style="border-bottom: 1px solid #E8E8E8; vertical-align: top; text-align: left; color: black;" | Additional hardware
| style="text-align: left; vertical-align: top;" | Company card registered in the Tachograph Tachograph Card reader (SmartCardReader), recommended model: Cryptotech CLOUD 2700 R
|-
! style="border-bottom: 1px solid #E8E8E8; vertical-align: top; text-align: left; color: black;" | SMS Sign FM5300
| style="text-align: left; vertical-align: top;" | DDD functionality should be activated before mounting in the vehicle
Firmware version FW 01.02.xx need to be signed. FW 01.03.xx does
not need signing to work with WEB Tacho. FM63 does not require
sign’ing
|-
|} * Can be checked with ''getver'' SMS command

==Preparing Company Card==

* Company card, which will be used for remote DDD files download, must be registered in desired tachograph.

* Usually if direct download was made using some particular company card, then this card is registered in tachograph.

* One PC with company card connected to it using card reader must be available all the time for authorization between tachograph and server to complete.

* To make fully functioning WEB Tacho, there should be a server or any PC with an internet connection and connected company card. Only then tachograph may authorize and upload tachograph files to the server.

* To connect company card to WEB Tacho, “Remote SCard Reader” should be used, which will be given by the sales representative.
==Installation Guide==

Install the “Remote SCard Reader” on this PC:
* Step 1 - Launch installer application “Remote SCard Reader”. Software can be found [[Teltonika_Remote_Smart_Card_Reader|here]]
* Step 2 - Press “Install” (1)
* Step 3 - Wait for the installation to complete
* Step 4 - Close installation.

If the card reader is connected and the company card is inserted – you should see the following view:

[[image:SmartCardReaderMonitor.png|500px]]

Copy Card ID and register in [[WEB Tacho Company Card management]].

Here are the possible conditions of Company card shown in the reader:

[[image:PossibleConditionsOfCompanyCard.png|500px]]

* <span style="color:gray">Gray</span> - Company card is not inserted
* <span style="color:red">Red</span> - Unable to read Card ID, inappropriate or broken Card.
* <span style="color:orange">Orange</span> - Company card ID read, waiting for authorization from server.
* <span style="color:green">Green</span> - Company card ID is read and authorized.
* <span style="color:blue">Blue</span> - Shows using what FM device(imei) company card is communicating with tachograph.

[[Category:WEB Tacho]]