View source for Inateck BCST-70 First Start

__TOC__

==Inateck Barcode Scanner Configuration==

===Configure Scanner to use Enter as Suffix===
</br>
Power on Inateck BCST-70 by toggling switch from OFF to ON.


<span style="color:#FF0000">'''IMPORTANT NOTE'''</span> : ''Inateck Scanner could not scan Barcodes through screen/monitor, barcodes should be printed as hard 
copy to proceed on the configuration.''


#Scan the "Enter Setup" barcode </br></br>[[File:Enter_Setup.png|325px]]</br></br>
#Scan the "Apply Enter as Stop Character" barcode </br></br>[[File:Stop_Character1.png|325px]]</br></br> 
#Scan the "Exit with Save" barcode </br></br>[[File:Exit_Save.png|325px]]</br></br>

===Configure Scanner to SPP Mode===
</br>
BCST-70 has Bluetooth® capability that supports data transmission under HID and SPP two modes. When under HID mode, the BCST-70 connects your phone or computer automatically after pairing successfully. When under SPP mode, the BCST-70 can only finish connecting your phone or laptop with help of serial debugging tools after pairing successfully. For connection with Teltonika FM devices, scanner must use SPP Mode.


<span style="color:#FF0000">'''IMPORTANT NOTE'''</span> : ''If scanner does not use SPP mode, Teltonika FM device would not detect the scanner under the Bluetooth® tab''


#Scan the "Enter Setup" barcode </br></br>[[File:Enter_Setup.png|325px]]</br></br>
#Scan the "Apply Enter as Stop Character" barcode </br></br>[[File:SPP_Mode.png|325px]]</br></br> 
#Scan the "Exit with Save" barcode </br></br>[[File:Exit_Save.png|325px]]</br></br>

[[Category:Inateck BCST-70 Barcode Scanner]]