View source for TAT100 FAQ


*[[Why does TAT100 not send data?]]
*[[Common configuration issues of TAT100]]
*<div class="mw-customtoggle-1" style="color: #0054A6;">What effects does a horizontal alignment have - especially for G-dependent movements on different axes?</div>
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-1">
<div class="mw-collapsible-content">
Placement recommendation is to increase GNSS accuracy. Device placement does not have an impact on movement detection - either way, one axis will be affected on a sudden move, and if values from the accelerometer exceed configured threshold, device will change its '''On Stop''' counter to '''On Move''' counter.
</div>
</div>

*<div class="mw-customtoggle-2" style="color: #0054A6;">What recommendations are there for horizontal mounting, especially for IP67 feature?</div>
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-2">
<div class="mw-collapsible-content">
Do not overtighten the case while mounting in order to not affect waterproofing.
</div>
</div>

*<div class="mw-customtoggle-3" style="color: #0054A6;">When does the period for periodic tracking settings start?</div>
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-3">
<div class="mw-collapsible-content">
After flipping the switch to ON position.
</div>
</div>

*<div class="mw-customtoggle-4" style="color: #0054A6;">How does periodic sending work on an object that is not moving?</div>
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-4">
<div class="mw-collapsible-content">
Based on '''On Stop''' counter. If device detected movement (exceeded configured threshold) it instantly jumps to '''On Move''' counter.
</div>
</div>

*<div class="mw-customtoggle-5" style="color: #0054A6;">Is the module on until it finds a GPS fix?</div>
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-5">
<div class="mw-collapsible-content">
TM2500 module is fully awake until data is sent to server (including GNSS fix search)
</div>
</div>

*<div class="mw-customtoggle-6" style="color: #0054A6;">Why valid GPS signal is not always transmitted?</div>
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-6">
<div class="mw-collapsible-content">
If '''Static Navigation''' is '''Enabled''' – Device will not try to get GNSS fix if no movement was detected between sleep intervals, instead it will send last known location instantly.
</div>
</div>

*<div class="mw-customtoggle-7" style="color: #0054A6;">How long does the module take to find a true position with GNSS?</div>
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-7">
<div class="mw-collapsible-content">
Up to 3 minutes. If it fails - device will send last known position.
</div>
</div>

*<div class="mw-customtoggle-8" style="color: #0054A6;">Is the modem always available via SMS?</div>
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-8">
<div class="mw-collapsible-content">
No. The Device will receive SMS messages only when the modem is ON (awake state). The device enters the awake state when sending the periodic data.
</div>
</div>

*<div class="mw-customtoggle-9" style="color: #0054A6;">Where can we define the period for FOTA WEB connection?</div>
<div class="mw-collapsible mw-collapsed" id="mw-customcollapsible-9">
<div class="mw-collapsible-content">
TAT100 devices do not connect to FOTA Web periodically. It will automatically connect to FOTA Web only on initial startup (when the switch is flipped from OFF to ON position). Connection to FOTA Web should be initiated via the 'web_connect' SMS/GPRS command. This is to preserve battery power.
</div>
</div>
</td>
                </tr>
            </table>
        </td>
        <td width=50%>
            <table width=90%>
                <tr>
                    <td>

[[Category: TAT100]]