View source for Template:FMB002 First start card

[[Image:Qsg_rut950_teltonika.PNG|centre]]


<b>{{{description|Advanced Plug and Track real-time tracking terminal with GNSS, GSM and Bluetooth connectivity}}}</b>{{{pic|[[Image:FMB002 600x600 1.png|400px|right]]}}}


__TOC__




=='''How to insert Nano-SIM card and connect battery'''==

# Open the top cover of the device. The cover is opened by unclipping it at the recessed corner.
# Insert '''Nano-SIM card'' as shown with '''PIN request disabled''' or read our Wiki how to enter it later in Teltonika Configurator. Make sure that the Nano-SIM card is fitted properly into the holder.
# Connect the battery as shown in the figure.
# After '''configuration''', see “PC Connection (Windows)”, attach device '''cover''' back.



The device is ready to be mounted.


{{{insert1|[[Image:Fmb020 card 1.png|280px]]}}}{{{insert2|[[Image:Fmb020 card 2.png|280px]]}}}{{{insert3|[[Image:Fmb020 card 3.png|280px]]}}}{{{insert4|[[Image:Fmb020 card 4.png|280px]]}}}


{|
|-
| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Nano-}}}SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise {{{sim_type|Nano-}}}SIM card might be damaged or device will not detect it.</b>
|}