Line 1: |
Line 1: |
− | K-Line Data functionality allows user to monitor and use incoming data from Tachograph via K-line. Kline periodic record timeout paramater is used to set interval between K-Line records. Those records aren't included in standard record and will be sent as seperate packet.
| + | {{Template:FMB630_K-Line_Data}} |
− | | + | [[Category:FMB630 Configuration]] |
− | To configure any K-Line parameter, every parameter should be separated with comma.
| |
− | For example, configuring first profile Kline Driver 2 ID by SMS, SMS should look like:
| |
− | “ setparam 1062 1,,,3” (“ setparam 1062 <Priority>,<HighLevel>,<LowLevel>,<generateEvent>”)
| |
− | Driver 2 ID do not have High/Low level so they are skipped by using comma “,,“
| |
− | Other Kline properties can be configured in the same logic.
| |
− | | |
− | [[Image:kline_tab.png|none]] | |