Changes

*Records Settings, where user can enable or disable records when GPS is not available (no time synchronization);

*Records Settings, where user can enable or disable records when GPS is not available (no time synchronization);

*GNSS Settings, where user can choose satellite system and GNSS FIX Timeout Time (if after timeout there will not be synchronized time, it will be synchronized via NTP server);

*GNSS Settings, where user can choose satellite system and GNSS FIX Timeout Time (if after timeout there will not be synchronized time, it will be synchronized via NTP server);

*Ignition Settings:  

*'''Ignition Settings: '''

Ignition Source - sets ignition triggered functionalities to be triggered by:

*Ignition Source - sets ignition triggered functionalities to be triggered by:

**Power Voltage (if voltage is between High Voltage Level and Low Voltage Level the ignition is considered to be turned on);

**Power Voltage (if voltage is between High Voltage Level and Low Voltage Level the ignition is considered to be turned on);

**Digital Input (DIN1 ON – ignition on, DIN1 OFF – ignition off);

**Digital Input (DIN1 ON – ignition on, DIN1 OFF – ignition off);

**Movement (if accelerometer/movement sensor detects movement then ignition is on, if movement stops – ignition is off).

**Movement (if accelerometer/movement sensor detects movement then ignition is on, if movement stops – ignition is off).

Ignition Detection:

*Ignition Detection:

**Manual – user manually selects Power Voltage range;

**Manual – user manually selects Power Voltage range;

**Automatic – automatically detect Power Voltage change.

**Automatic – automatically detect Power Voltage change.