0
edits
Changes
FM6300 External Devices (view source)
Revision as of 09:11, 24 September 2018
, 09:11, 24 September 2018Created page with "External Devices do not depend on selected profile; they are common for all profiles. To configure these parameters choose the TAB named “External Devices” and make all ne..."
External Devices do not depend on selected profile; they are common for all profiles. To configure these parameters choose the TAB named “External Devices” and make all necessary changes.
[[Image:FMB630_external_devices.png|none|650px]]
{| class="wikitable"
|+
! style="background: 9494b8; color: black;" |'''Parameter Name'''
! style="background: 9494b8; width: 600px; color: black;" |'''Parameter description'''
|-
! style="background: white; color: black;"|FMS/Tachograph Settings
! style="background: white; color: black;"|Are used to configure CAN line and Tachograph setting such as Enable/Disable, baudrate, operation mode, tachograph ignition source, tachograph type.
|-
! style="background: white; color: black;"|Tacho Web
! style="background: white; color: black;"|User can enable Web DDD synchronization functionality; enter tacho web server domain and port.User can enable Web DDD synchronization functionality; enter tacho web server domain and port.
|-
! style="background: white; color: black;"|Tacho Web start delay
! style="background: white; color: black;"|When ignition is on Tacho web starts after this delay.
|-
! style="background: white; color: black;"|Analog Input Settings
! style="background: white; color: black;"|User can change the range of analog inputs. There are two possible changes: 10 V (0-10 V) and 30 V (0-30 V).
|-
! style="background: white; color: black;"|COM1 and COM2 Settings
! style="background: white; color: black;"|Configures COM1 and COM2 ports. User can configure baudrate, working mode, enable/disable timestamp and change CMD ID(used to identify from which COM port data came)
|-
! style="background: white; color: black;"|COM start/end byte
! style="background: white; color: black;"|COM1 and COM2 start and end byte are filter for TCP Binary link mode.
|-
! style="background: white; color: black;"|RS485 Settings(COM1)
! style="background: white; color: black;"|Configures RS485 settings such as activation of RS485 protocol, baudrate and working mode.
|-
! style="background: white; color: black;"|LLS Sensor Settings
! style="background: white; color: black;"|Allows user to set LLS sensors addresses in preffered order
|-
|}
[[Image:FMB630_external_devices.png|none|650px]]
{| class="wikitable"
|+
! style="background: 9494b8; color: black;" |'''Parameter Name'''
! style="background: 9494b8; width: 600px; color: black;" |'''Parameter description'''
|-
! style="background: white; color: black;"|FMS/Tachograph Settings
! style="background: white; color: black;"|Are used to configure CAN line and Tachograph setting such as Enable/Disable, baudrate, operation mode, tachograph ignition source, tachograph type.
|-
! style="background: white; color: black;"|Tacho Web
! style="background: white; color: black;"|User can enable Web DDD synchronization functionality; enter tacho web server domain and port.User can enable Web DDD synchronization functionality; enter tacho web server domain and port.
|-
! style="background: white; color: black;"|Tacho Web start delay
! style="background: white; color: black;"|When ignition is on Tacho web starts after this delay.
|-
! style="background: white; color: black;"|Analog Input Settings
! style="background: white; color: black;"|User can change the range of analog inputs. There are two possible changes: 10 V (0-10 V) and 30 V (0-30 V).
|-
! style="background: white; color: black;"|COM1 and COM2 Settings
! style="background: white; color: black;"|Configures COM1 and COM2 ports. User can configure baudrate, working mode, enable/disable timestamp and change CMD ID(used to identify from which COM port data came)
|-
! style="background: white; color: black;"|COM start/end byte
! style="background: white; color: black;"|COM1 and COM2 start and end byte are filter for TCP Binary link mode.
|-
! style="background: white; color: black;"|RS485 Settings(COM1)
! style="background: white; color: black;"|Configures RS485 settings such as activation of RS485 protocol, baudrate and working mode.
|-
! style="background: white; color: black;"|LLS Sensor Settings
! style="background: white; color: black;"|Allows user to set LLS sensors addresses in preffered order
|-
|}