Changes

no edit summary
Line 1: Line 1:  
===Please follow this tutorial to check what OBD data is available from the vehicle===
 
===Please follow this tutorial to check what OBD data is available from the vehicle===
   −
1. Send ''[[FMB obdinfo|obdinfo]]'' SMS/GPRS command to device.
+
1. Send ''[[FMB obdinfo|obdinfo]]'' SMS/GPRS command to the device.
    
2. The device responds with: Protocol, VIN, Adaptive Timing value, requested PID counter, OBD application state, available vehicle PIDs, mil status, number of DTCs.
 
2. The device responds with: Protocol, VIN, Adaptive Timing value, requested PID counter, OBD application state, available vehicle PIDs, mil status, number of DTCs.
Line 7: Line 7:  
For example: Protocol:6 VIN: WVWZZZAUZFW125650,TM:0,CNT:11,ST:PROTOCOL DETECTION,P1:0x98180001,P2:0x1,P3:0xE0800020,P4:0x0,Fuel:OFF,MIL:0,DTC:0,ID0
 
For example: Protocol:6 VIN: WVWZZZAUZFW125650,TM:0,CNT:11,ST:PROTOCOL DETECTION,P1:0x98180001,P2:0x1,P3:0xE0800020,P4:0x0,Fuel:OFF,MIL:0,DTC:0,ID0
   −
3. According to the obdinfo response you can check available OBD parameters via OBD PID Reader. OBD reader can be found [https://www.glmsoftware.com/Downloads1.aspx '''here''']
+
3. According to the obdinfo response, you can check available OBD parameters via OBD PID Reader. OBD reader can be found [https://www.glmsoftware.com/Downloads1.aspx '''here''']
    
[[Image:OBDII_SCAN.png|center]]
 
[[Image:OBDII_SCAN.png|center]]