Changes

Device first scan the sensors for the 60 seconds, after this time, the device will pack the remaining records to the AVL data package. Total sensors information update time will be 120 seconds.

Device first scan the sensors for the 60 seconds, after this time, the device will pack the remaining records to the AVL data package. Total sensors information update time will be 120 seconds.

==Advanced Mode==

 

== Advanced Mode ==

<br>When Advanced mode is selected a table with configurable parameters will appear:[[Image:BLE advanced window.png|1000px|none]]<br />

<br>When Advanced mode is selected a table with configurable parameters will appear:[[Image:BLE advanced window.png|1000px|none]]<br />

|474

|474

|478

|478

|}<br />

|}

==Supported Sensors List==

==Supported Sensors List==

Devices which are listed with the BT 4.0 supportive, have the extended List of the BLE Sensors which are available as the Preset settings and was fully tested from our end with the supportive.

Devices which are listed with the BT 4.0 supportive, have the extended List of the BLE Sensors which are available as the Preset settings and was fully tested from our end.

While following the steps showed in the images below, you can find the supported sensors in our configurator.

While following the steps showed in the images below, you can find the supported sensors in our Configurator.

 

In the Configurator, find the Bluetooth 4.0 Settings menu, select the advanced sensors mode which was mentioned before. The following window should appear.

[[Image:Preset1.png|1200px|none]]

[[Image:Preset1.png|1200px|none]]

After the '''Showed Presets Button''' was pressed, the following window should appear.

At the top right corner, you should see the following '''Buttons''', press on the first one from the left.  

[[Image:Preset2.png|200px|none]]

[[Image:Preset2.png|200px|none]]