2,414
edits
Changes
Template:FMB Blue-tooth 4.0 settings (view source)
Revision as of 12:57, 7 January 2020
, 12:57, 7 January 2020no edit summary
Configurable parameters:<br />
Configurable parameters:
*'''''Non Stop Scan''''' - Enabled Non Stop Scan feature, device will try to scan for the sensors all the time if any of them are configured.
*'''''Non Stop Scan''''' - Enabled Non Stop Scan feature, device will try to scan for the sensors all the time if any of them are configured.
*'''''BLE Scan Duration''''' - Sensors data reading time.
*'''''BLE Scan Duration''''' - Sensors data reading time.
*'''''Scan retries until error''''' - Configured scan retries, to show the Error Value '3000' - sensor disconnected.
*'''''Scan retries until error''''' - Configured scan retries, to show the Error Value '3000' - sensor disconnected.
*'''''Working mode''''' – Bluetooth connection mode''. '''Disabled''':'' Bluetooth 4.0 connection will not be used. '''''TZ-BT04/05/05B sensor''':'' this Bluetooth connection will be used to communicate with TZ-BT04/05/05B sensor. '''''Advanced''' -'' It allows to gather data from BLE device‘s broadcast packets regardless of what data packing protocol is used''.''
*'''''Working mode''''' – Bluetooth connection mode''. '''Disabled''':'' Bluetooth 4.0 connection will not be used. '''''TZ-BT04/05/05B sensor''':'' this Bluetooth connection will be used to communicate with TZ-BT04/05/05B sensor. '''''Advanced''' -'' It allows to gather data from BLE device‘s broadcast packets regardless of what data packing protocol is used''.''
== Few Examples of the Configured Values: ==
==Few Examples of the Configured Values:==
Non Stop Scan Enabled.
Non Stop Scan Enabled.
[[Image:Non Stop.png|300px|none]]
[[Image:Non Stop.png|300px|none]]
Device first scan the sensors for the 60 seconds, after this time, the device will pack the remaining records to the AVL data package. Total sensors information update time will be 120 seconds.
Device first scan the sensors for the 60 seconds, after this time, the device will pack the remaining records to the AVL data package. Total sensors information update time will be 120 seconds.
<br />
== Advanced Mode ==
<br>When Advanced mode is selected a table with configurable parameters will appear:[[Image:BLE advanced window.png|1000px|none]]<br />
<br>When Advanced mode is selected a table with configurable parameters will appear:[[Image:BLE advanced window.png|1000px|none]]<br />
|478
|478
|}<br />
|}<br />
==Supported Sensors List==
Devices which are listed with the BT 4.0 supportive, have the extended List of the BLE Sensors which are available as the Preset settings and was fully tested from our end with the supportive.
While following the steps showed in the images below, you can find the supported sensors in our configurator.
[[Image:Preset1.png|1200px|none]]
After the '''Showed Presets Button''' was pressed, the following window should appear.
[[Image:Preset2.png|200px|none]]
The supportive sensors are listed below:
*BLE TPMS -Tire Pressure Monitoring System.
*Efento Humidity BLE sensors (version 2.2 and 4 presets)
*ELA ANG (Angle)
*ELA MOV AG (Movement and Angle)
*ELA PUCK ID (ID)
*ELA RHT (Temperature and Humidity)
*ELA T (Temperature)
*ELA MOV MAG (Movement Magnetic)
*Escort Fuel BLE sensors
*Escort luminosity BLE sensors
*Escort Temperature BLE sensors
*S1 BLE Motion, Humidity and Temperature Sensors
*Technoton Wireless fuel level sensors
*TZ-BT04 Temperature and Humidity Sensors
*TZ-BT05 Temperature and Humidity Sensors
==FMB Family Bluetooth 4.0 support==
==FMB Family Bluetooth 4.0 support==
<br>
<br>
</table>
</table>
