0
edits
Changes
no edit summary
<p>1. Connect the device to the configurator and go to Bluetooth settings. Make sure that BT Radio is set to Enable (visible) or Enable (hidden)
<p>1. Connect the device to the configurator and go to Bluetooth settings. Make sure that BT Radio is set to Enable (visible) or Enable (hidden)
[[Image:BTRadio_Enable.png|300x200px|center|upright=0.35]]
[[Image:BTRadio_Enable.png|300x200px|center|upright=0.35]]
<p>2. Go to Beacon List, set Beacon Detection to All or Configured. When using configured, the beacon information will have to be entered in order for the device to be able to detect the beacon. Beacon information should be entered in this format:
<p>2. Go to Beacon List, set Beacon Detection to All or Configured. When using configured, the beacon information will have to be entered in order for the device to be able to detect the beacon. Beacon information should be entered in this format:
<p>'''IBeacon:'''
<p>'''iBeacon:'''
<p>UUID:Major:Minor
<p>UUID:Major:Minor
[[Image:BeaconList_Configured.png|center|800px]]
[[Image:BeaconList_Configured.png|center|800px]]
<p>3. In order for the Blue ID beacon to start transmitting data, it will have to be turned on. To enable your BLE sensors or BLE Beacons use the [https://play.google.com/store/apps/details?id=com.ela.mobileapp.elamobileapp&hl=en_US| Device Manager Mobile] application.
<br><br>Your phone or device that is used for configuring BLE Sensors or Beacons has to have NFC (configurations are written to a sensor or beacon through NFC).
<br><br>Below you can find on how to Enable and configure ELA Coin ID or ELA Puck ID to send in the iBeacon format:
[[Image:Blue_Configuration.png|center|400px]]