Changes

Created page with "Here are steps how to capture OBDII log from teltonika devices with OBDII dongle or directly supporting OBDII data reading<p>This functionality is available after '''03.08.00'..."
Here are steps how to capture OBDII log from teltonika devices with OBDII dongle or directly supporting OBDII data reading<p>This functionality is available after '''03.08.00''' firmware version.</p>
#1) Make sure that the CAN adapter is connected properly to the vehicle and to the FMB1YX series device. 2) Start vehicle engine (skip if vehicle is deployed) 3) Send following '''SMS commands''' to teltonika tracker:
#* If you have set SMS login and password:<code>login pass sdformat</code> <code>'''Note:'''This will delete all previous DUMP logs without and records that have not been sent yet.</code>
#* IIf SMS login and password are not set leave two spaces before command: <code>sdformat</code>
#* If you have set SMS login and password <code>log2sdfilterset 0;2;4;7;1</code>
#* If SMS login and password are not set leave two spaces before command: <code>log2sdfilterset 0;2;4;7;1</code>If command <code>log2sdfilterset</code> was sent correctly you should receive SMS Response:<code>Enabled Trace Filters:5</code> then you can restart the device
#* If you have set SMS login and password: <code>login pass cpureset</code>
#* If SMS login and password are not set leave two spaces before command: <code>cpureset</code> Filter description: Filter 0 - default filters (No additional data) Filter 2 - turn on AVL record creation filter Filter 4 - turn on CAN adapter filter Filter 7 - BT3 connection filter (only needed when troubleshooting OBDII BT dongle) Filter 1 - save installed filters to memory after restart 4) After the SMS response message CAN adapter log capturing has been started. 5) Wait at least '''5 minutes''' to get enough OBDII data and '''turn off''' vehicle engine.(skip if vehicle is deployed) 6) '''Download''' captured log (dump) files.
#*[[File:dumpfilesfromcfg.gif|center|link=https://wiki.teltonika-gps.com/view/File:Dumpfilesfromcfg.gif]]<p>Please check [[FMB120_Status_info#Maintenance|Status info→Maintenance→Log/Dump]] and download dump <code>YYYY_MM_DD_HH_MM_SS_FMB1YX_IMEI_Dump.zip</code>.</p>
#*Using '''FOTA WEB'''[[File:FOTAWEB.gif|center|link=https://wiki.teltonika-gps.com/view/File:FOTAWEB.gif]]Enter FOTA WEB → Press on '''Devices''' tab → Select your device and press [[File:Fota_actions.png|90px|link=]] → '''Download from device''' → '''Continuous log files (2)''' (<span>2 files. Each log size up to 1 MB</span>)→[[File:Fota_download.png|90px|link=]]. To start download process at once send following SMS command:
#**If you have set SMS login and password: <code>login pass web_connect</code>
#**If SMS login and password are not set leave two spaces before command: <code><span>aa</span>web_connect</code><p>If command was sent correctly you should receive SMS Response:<code>web_connect resp:OK</code></p><p>To find downloaded log press on device [[File:Fota_moreinfo.png|link=]] icon→Go to '''CONT.LOGS tab'''→Download <code>IMEI_TIMESTAMP.zip</code></p>
#After you have downloaded log files send following '''SMS command''' to FMX1YX device:
#*If you have set SMS login and password: <code>login pass log2sdfilterset 0</code>
#*If SMS login and password are not set leave two spaces before command: <code><span>aa</span>log2sdfilterset 0</code><p>If command was sent correctly you should receive SMS Response:<code>Enabled Trace Filters:1</code></p>
#These log (dump) files can be read only with '''special software'''. Provide these files to your '''Teltonika Sales manager''' or '''Teltonika Support team''' for further investigation.