Here is a visual demonstration of Bluetooth 4.0 sensors in a cold storage truck.
Here is a visual demonstration of Bluetooth 4.0 sensors in a cold storage truck.
<br/><br/><youtube>n0yJvoCBZLI</youtube><br/>
<br/><br/><youtube>n0yJvoCBZLI</youtube><br/>
+
+
==Backup Tracker==
+
+
FMB devices with '''03.27.07.Rev.804''' firmware version have an ability to set up TAT100 device as a backup tracker.
+
When the feature is enabled - FMB device starts to advertise encrypted BLE packets.
+
In this solution - FMB device is a main tracker and TAT100 is set up as a backup tracker - TAT100 periodically checks if FMB advertised packets are available. If no FMB packets are read - an alarm is sent from TAT100 side and tracker switches it's mode to become the main tracker.
+
+
To enable Backup tracker:
+
+
1) BLE Connection control must be prohibited:
+
<br>
+
[[Image:BLE_Connection_Control.png]]
+
<br>
+
2) Enable Backup Tracker:
+
<br>
+
[[Image:Backup_Tracker_enabled.png]]
+
+
'''Note:''' when Backup Tracker is enabled - '''BLE sensor and Beacon settings become disabled'''. Additionally - '''Ultra Deep Sleep mode is also disabled''' (in this mode BLE packets would not be advertised)
+
+
TAT100 device recognizes the BLE packets by FMB devices IMEI, therefore after FMB configuration is done - additional TAT100 device configuration is required to support the full solution.
+
You can learn more about the backup tracker and TAT100 configuration in our [https://wiki.teltonika-mobility.com/view/TAT100_Bluetooth_settings#Backup_Tracker wiki site]