293
edits
Changes
Template:FMB Blue-tooth 4.0 settings (view source)
Revision as of 11:08, 14 April 2022
, 11:08, 14 April 2022no edit summary
Here is a visual demonstration of Bluetooth 4.0 sensors in a cold storage truck.
Here is a visual demonstration of Bluetooth 4.0 sensors in a cold storage truck.
<br/><br/><youtube>n0yJvoCBZLI</youtube><br/>
<br/><br/><youtube>n0yJvoCBZLI</youtube><br/>
==Backup Tracker==
FMB devices with '''03.27.07.Rev.804''' firmware version have an ability to set up TAT100 device as a backup tracker.
When the feature is enabled - FMB device starts to advertise encrypted BLE packets.
In this solution - FMB device is a main tracker and TAT100 is set up as a backup tracker - TAT100 periodically checks if FMB advertised packets are available. If no FMB packets are read - an alarm is sent from TAT100 side and tracker switches it's mode to become the main tracker.
To enable Backup tracker:
1) BLE Connection control must be prohibited:
<br>
[[Image:BLE_Connection_Control.png]]
<br>
2) Enable Backup Tracker:
<br>
[[Image:Backup_Tracker_enabled.png]]
'''Note:''' when Backup Tracker is enabled - '''BLE sensor and Beacon settings become disabled'''. Additionally - '''Ultra Deep Sleep mode is also disabled''' (in this mode BLE packets would not be advertised)
TAT100 device recognizes the BLE packets by FMB devices IMEI, therefore after FMB configuration is done - additional TAT100 device configuration is required to support the full solution.
You can learn more about the backup tracker and TAT100 configuration in our [https://wiki.teltonika-mobility.com/view/TAT100_Bluetooth_settings#Backup_Tracker wiki site]
==FMB Family Bluetooth 4.0 support==
==FMB Family Bluetooth 4.0 support==
