Wiki Knowledge Base | Teltonika GPS

Changes

FTC921 First Start (view source)

Revision as of 11:14, 29 May 2023

1,746 bytes added ,  11:14, 29 May 2023
no edit summary
Line 23: Line 23:  
| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Nano-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Nano-}}}SIM card might be damaged or device will not detect it.</b>
 
| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Nano-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Nano-}}}SIM card might be damaged or device will not detect it.</b>
 
|}
 
|}
 +
 +
=='''PC CONNECTION (WINDOWS)=='''
 +
1. Power- up FTC921 with DC voltage (10-90V) power supply using power wires. LEDs should start blinking.
 +
 +
2. Connect device to computer using Micro-USB cable and install USB driver, see “How to install USB drivers (Windows)1”
 +
 +
 +
=='''HOW TO INSTALL USB DRIVERS (WINDOWS)'''==
 +
1. Please download COM port drivers from [https://wiki.teltonika-gps.com/images/d/d0/TeltonikaCOMDriver.zip here].
 +
 +
2. Extract and run TeltonikaCOMDriver.exe.
 +
 +
3. Click Next in driver installation window.
 +
 +
4. In the following window click Install button.
 +
 +
5. Setup will continue installing the driver and eventually the confirmation window will appear. Click Finish to complete the
 +
setup.
 +
 +
=='''CONFIGURATION (WINDOWS)'''==
 +
 +
At first FTC921 device will have default factory settings set. These settings should be changed according to the user's needs. Main
 +
configuration can be performed via Teltonika Configurator tool1 (TCT).
 +
 +
=='''MOUNTING RECOMMENDATIONS'''==
 +
'''DEVICE FASTENING'''
 +
 +
• Locate the battery in your vehicle. If present remove the battery cover to access the battery.
 +
 +
• There is a double sided tape on the back of the device, use it to attach the device on the battery, so that the GNSS antenna
 +
and LEDs indicators are facing up.
 +
 +
'''CONNECTING POWER SOURCE'''
 +
 +
• Device power wire is designed to be directly connected to the positive terminal fastener of the vehicle battery.
 +
 +
'''CONNECTING GROUND WIRE'''
 +
 +
• Connect ground wire to the vehicle frame or metal parts that are fixed to the frame.
 +
 +
• If the wire is fixed with the bolt, the loop must be connected to the end of the wire.
 +
 +
• Device ground wire is designed to be directly connected to the negative terminal fastener of the vehicle battery.
    
[[Category:FTC921]]
 
[[Category:FTC921]]
Retrieved from "https://wiki.teltonika-gps.com/view/Special:MobileDiff/86172"