Line 20: |
Line 20: |
| * <span style=color:#F6A83E>TCP Binary</span> – for routing any binary input data from external device to the server. | | * <span style=color:#F6A83E>TCP Binary</span> – for routing any binary input data from external device to the server. |
| | | |
− | ===RS-232 Baudrate and parity=== | + | ====RS-232 Baudrate and parity==== |
| | | |
| Every RS-232 mode supports different baudrates, but each mode has its own default baudrate value. Default baudrate and parity values for each RS-232 mode are provided in the table below. | | Every RS-232 mode supports different baudrates, but each mode has its own default baudrate value. Default baudrate and parity values for each RS-232 mode are provided in the table below. |
Line 75: |
Line 75: |
| |} | | |} |
| | | |
− | ===RS-232 TCP Binary mode settings=== | + | ====RS-232 TCP Binary mode settings==== |
| | | |
| RS-232 TCP Binary Mode has additional configurable parameters for advanced data filtering. | | RS-232 TCP Binary Mode has additional configurable parameters for advanced data filtering. |
| | | |
− | ===RS232 Garmin Mode settings=== | + | ====RS232 Garmin Mode settings==== |
| | | |
| Garmin FMI mode has addditional filtering capabilities. It is possible to filter Ping and Unicode packets. If <span style=color:#F6A83E>Ping</span> filter will be enabled, then Ping packets will be blocked. If <span style=color:#F6A83E>Unicode</span> filter will be enabled, then Unicode packets will not be sent to server. Both filters may be enabled for simulatneous work. | | Garmin FMI mode has addditional filtering capabilities. It is possible to filter Ping and Unicode packets. If <span style=color:#F6A83E>Ping</span> filter will be enabled, then Ping packets will be blocked. If <span style=color:#F6A83E>Unicode</span> filter will be enabled, then Unicode packets will not be sent to server. Both filters may be enabled for simulatneous work. |
| | | |
− | ===RS485 working mode=== | + | ===RS485 modes=== |
| | | |
| RS485 support several modes: | | RS485 support several modes: |
Line 92: |
Line 92: |
| * TCP Binary – for routing any binary input data from external device to server. | | * TCP Binary – for routing any binary input data from external device to server. |
| | | |
− | ===RS485 Baudrate=== | + | ====RS485 Baudrate==== |
| Every RS485 mode support different baudrates, but each mode has its own default baudrate value. Default baudrate values for each RS485 working mode are provided in table 14. | | Every RS485 mode support different baudrates, but each mode has its own default baudrate value. Default baudrate values for each RS485 working mode are provided in table 14. |
| | | |
− | ===RS485 LLS Sensors=== | + | ====RS485 LLS Sensors==== |
| LLS addresses may be configured for 5 LLS sensors. If at least one LLS sensor is connected to FMB125 when configuring device with configurator LLS sensor ID will be entered automatically. | | LLS addresses may be configured for 5 LLS sensors. If at least one LLS sensor is connected to FMB125 when configuring device with configurator LLS sensor ID will be entered automatically. |