0
edits
Changes
mLine 20:
Line 20: − + Line 75:
Line 75: − + − + − + Line 92:
Line 92: − + − +
→FMB125 RS-232/RS-485 parameter configuration
* <span style=color:#F6A83E>TCP Binary</span> – for routing any binary input data from external device to the server.
* <span style=color:#F6A83E>TCP Binary</span> – for routing any binary input data from external device to the server.
===RS-232 Baudrate and parity===
====RS-232 Baudrate and parity====
Every RS-232 mode supports different baudrates, but each mode has its own default baudrate value. Default baudrate and parity values for each RS-232 mode are provided in the table below.
Every RS-232 mode supports different baudrates, but each mode has its own default baudrate value. Default baudrate and parity values for each RS-232 mode are provided in the table below.
|}
|}
===RS-232 TCP Binary mode settings===
====RS-232 TCP Binary mode settings====
RS-232 TCP Binary Mode has additional configurable parameters for advanced data filtering.
RS-232 TCP Binary Mode has additional configurable parameters for advanced data filtering.
===RS232 Garmin Mode settings===
====RS232 Garmin Mode settings====
Garmin FMI mode has addditional filtering capabilities. It is possible to filter Ping and Unicode packets. If <span style=color:#F6A83E>Ping</span> filter will be enabled, then Ping packets will be blocked. If <span style=color:#F6A83E>Unicode</span> filter will be enabled, then Unicode packets will not be sent to server. Both filters may be enabled for simulatneous work.
Garmin FMI mode has addditional filtering capabilities. It is possible to filter Ping and Unicode packets. If <span style=color:#F6A83E>Ping</span> filter will be enabled, then Ping packets will be blocked. If <span style=color:#F6A83E>Unicode</span> filter will be enabled, then Unicode packets will not be sent to server. Both filters may be enabled for simulatneous work.
===RS485 working mode===
===RS485 modes===
RS485 support several modes:
RS485 support several modes:
* TCP Binary – for routing any binary input data from external device to server.
* TCP Binary – for routing any binary input data from external device to server.
===RS485 Baudrate===
====RS485 Baudrate====
Every RS485 mode support different baudrates, but each mode has its own default baudrate value. Default baudrate values for each RS485 working mode are provided in table 14.
Every RS485 mode support different baudrates, but each mode has its own default baudrate value. Default baudrate values for each RS485 working mode are provided in table 14.
===RS485 LLS Sensors===
====RS485 LLS Sensors====
LLS addresses may be configured for 5 LLS sensors. If at least one LLS sensor is connected to FMB125 when configuring device with configurator LLS sensor ID will be entered automatically.
LLS addresses may be configured for 5 LLS sensors. If at least one LLS sensor is connected to FMB125 when configuring device with configurator LLS sensor ID will be entered automatically.