Line 83: |
Line 83: |
| Garmin FMI mode has addditional filtering capabilities. It is possible to filter Ping and Unicode packets. If <span style=color:#F6A83E>Ping</span> filter will be enabled, then Ping packets will be blocked. If <span style=color:#F6A83E>Unicode</span> filter will be enabled, then Unicode packets will not be sent to server. Both filters may be enabled for simulatneous work. | | Garmin FMI mode has addditional filtering capabilities. It is possible to filter Ping and Unicode packets. If <span style=color:#F6A83E>Ping</span> filter will be enabled, then Ping packets will be blocked. If <span style=color:#F6A83E>Unicode</span> filter will be enabled, then Unicode packets will not be sent to server. Both filters may be enabled for simulatneous work. |
| | | |
− | ===RS485 modes=== | + | ===RS-485 modes=== |
| | | |
− | RS485 support several modes:
| + | RS-485 supports several modes: |
| * Log Mode – suitable for debugging/logging; | | * Log Mode – suitable for debugging/logging; |
− | * NMEA – NMEA logs are sent via RS232 or RS485; | + | * NMEA – NMEA logs are transferred; |
| * LLS – LLS sensors support; | | * LLS – LLS sensors support; |
− | * TCP ASCII – for routing any input string from external device to server; | + | * TCP ASCII – for routing any input string from external device to the server; |
− | * TCP Binary – for routing any binary input data from external device to server. | + | * TCP Binary – for routing any binary input data from external device to the server. |
| | | |
− | ====RS485 Baudrate==== | + | ====RS-485 baudrate==== |
− | Every RS485 mode support different baudrates, but each mode has its own default baudrate value. Default baudrate values for each RS485 working mode are provided in table 14. | + | Every RS-485 mode supports different baudrates, but each mode has its own default baudrate value. Default baudrate values for each RS-485 mode are provided in the table above. |
| | | |
− | ====RS485 LLS Sensors==== | + | ====RS-485 LLS sensors==== |
− | LLS addresses may be configured for 5 LLS sensors. If at least one LLS sensor is connected to FMB125 when configuring device with configurator LLS sensor ID will be entered automatically. | + | LLS addresses may be configured for 5 LLS sensors. If at least one LLS sensor is connected to FMB125 when configuring device using configurator, LLS sensor ID will be entered automatically. |