Changes

Template:FM36YX Scenarios settings (view source)

Revision as of 14:36, 31 May 2018

160 bytes removed ,  14:36, 31 May 2018
m
no edit summary
Line 9: Line 9:  
* [[{{{model|FM36YX}}}_Features_settings#Jamming_detection|Jamming detection]]
 
* [[{{{model|FM36YX}}}_Features_settings#Jamming_detection|Jamming detection]]
 
* [[{{{model|FM36YX}}}_Features_settings#Authorized_driving|Authorized driving]]
 
* [[{{{model|FM36YX}}}_Features_settings#Authorized_driving|Authorized driving]]
−
* [[{{{model|FM36YX}}}_Features_settings# | ]]
+
* [[{{{model|FM36YX}}}_Features_settings#Immobilizer|Immobilizer]]
−
* [[{{{model|FM36YX}}}_Features_settings# | ]]
  −
* [[{{{model|FM36YX}}}_Features_settings# | ]]
  −
* [[{{{model|FM36YX}}}_Features_settings# | ]]
  −
* [[{{{model|FM36YX}}}_Features_settings# | ]]
   
<br><br>
 
<br><br>
 
===Green Driving===
 
===Green Driving===
Line 34: Line 30:  
----
 
----
 
DOUT2 is continuously OFF. Dout2 (if selected DOUT2) turns ON if Ignition turns ON (configured Ignition Source=1). After authorizing iButton (iButton ID is read and it matches the ID from the iButton list), DOUT2 turns OFF. After successful authorization ignition can be turned OFF (configured Ignition Source =0) for no longer than 30 seconds, otherwise authorization must be repeated.<br><br>
 
DOUT2 is continuously OFF. Dout2 (if selected DOUT2) turns ON if Ignition turns ON (configured Ignition Source=1). After authorizing iButton (iButton ID is read and it matches the ID from the iButton list), DOUT2 turns OFF. After successful authorization ignition can be turned OFF (configured Ignition Source =0) for no longer than 30 seconds, otherwise authorization must be repeated.<br><br>
−
===Immobilizer===(if selected DOUT2)
+
===Immobilizer===
 
----
 
----
−
DOUT2 is continuously OFF. Dout2 turns ON if Ignition turns ON (configured Ignition Source = 1). After iButton ID is read (any iButton is attached), DOUT2 turns OFF. After iButton identification, ignition can be turned OFF (configured Ignition Source = 0) for no longer than 30 seconds, otherwise immobilizer must be repeated.
+
(if selected DOUT2) DOUT2 is continuously OFF. Dout2 turns ON if Ignition turns ON (configured Ignition Source = 1). After iButton ID is read (any iButton is attached), DOUT2 turns OFF. After iButton identification, ignition can be turned OFF (configured Ignition Source = 0) for no longer than 30 seconds, otherwise immobilizer must be repeated.<br><br>
Retrieved from "https://wiki.teltonika-gps.com/view/Special:MobileDiff/14277"

Navigation menu